Ceiling fixture help
 

I'm trying to replace an old ceiling fixture. Reason: one of the bulbs
couldn't be removed and the socket was shot (but the bulb still worked
until this morning).

The old fixture had (2) 60W bulbs -- each with a black and white wire
"hard"-wired to their sockets (it was old). In the ceiling, there are
(2) wires -- 1 black and 1 white (the wiring is old cloth-covered;
originally the house had knob & tube/fuses).

The new fixture I purchased also had (2) 60W bulbs -- each with a black
and white wire (so 4 wires total coming off the new fixture).

Trouble is, when I connect the fixture I can only get (1) bulb to light
-- the black lead bulb. I've tried all black-to-black & all
white-to-white wiring; one white/one black to black (and one white/one
black to white) -- and I get the same result. Then I tried each black
and white on the fixture together and then to the black and white in
the ceiling -- this resulted in nothing (no light) -- and not even a
circuit trip.

Any idea what could be going on?

Thanks for any help/insight you can offer!

Ceiling fixture help
 

If you've tied the three black wires together and the three white wires
together, and only one lamp lights, you either have a bad bulb or a bad
socket


wrote in message
oups.com...
I'm trying to replace an old ceiling fixture. Reason: one of the bulbs
couldn't be removed and the socket was shot (but the bulb still worked
until this morning).

The old fixture had (2) 60W bulbs -- each with a black and white wire
"hard"-wired to their sockets (it was old). In the ceiling, there are
(2) wires -- 1 black and 1 white (the wiring is old cloth-covered;
originally the house had knob & tube/fuses).

The new fixture I purchased also had (2) 60W bulbs -- each with a black
and white wire (so 4 wires total coming off the new fixture).

Trouble is, when I connect the fixture I can only get (1) bulb to light
-- the black lead bulb. I've tried all black-to-black & all
white-to-white wiring; one white/one black to black (and one white/one
black to white) -- and I get the same result. Then I tried each black
and white on the fixture together and then to the black and white in
the ceiling -- this resulted in nothing (no light) -- and not even a
circuit trip.

Any idea what could be going on?

Thanks for any help/insight you can offer!

Ceiling fixture help
 

Ceiling fixture help
 

Yeah, that's the weird thing -- I thought the same. So I tried the same
bulb that worked in the other socket -- nothing.

Then I returned the fixture -- and got another one (same
type/replacement) -- and it does the same thing.

Very odd. Doesn't make any sense.

The line doesn't end at this fixture, though -- it goes up to (3) other
fixtures -- and there's also at least one outlet on the same line.

They're all working fine.

Any ideas?


RBM remove this wrote:
If you've tied the three black wires together and the three white wires
together, and only one lamp lights, you either have a bad bulb or a bad
socket


wrote in message
oups.com...
I'm trying to replace an old ceiling fixture. Reason: one of the bulbs
couldn't be removed and the socket was shot (but the bulb still worked
until this morning).

The old fixture had (2) 60W bulbs -- each with a black and white wire
"hard"-wired to their sockets (it was old). In the ceiling, there are
(2) wires -- 1 black and 1 white (the wiring is old cloth-covered;
originally the house had knob & tube/fuses).

The new fixture I purchased also had (2) 60W bulbs -- each with a black
and white wire (so 4 wires total coming off the new fixture).

Trouble is, when I connect the fixture I can only get (1) bulb to light
-- the black lead bulb. I've tried all black-to-black & all
white-to-white wiring; one white/one black to black (and one white/one
black to white) -- and I get the same result. Then I tried each black
and white on the fixture together and then to the black and white in
the ceiling -- this resulted in nothing (no light) -- and not even a
circuit trip.

Any idea what could be going on?

Thanks for any help/insight you can offer!

Ceiling fixture help
 

Sorry -- my bad explanation.

Yes, I've tried all the blacks together -- and all the whites -- and I
still only get (1) bulb. There is a single switch that controls the
fixture. But the line continues upstairs to (3) other lights (all
controlled by their own switches) -- and there is at least one outlet
on the same run.

I switched the bulbs (put the working one in the non-working socket) --
and, I even returned the fixture (thinking the socket was faulty).

New replacement fixture = same result.

Can't figure it out...


Rich256 wrote:
wrote:
I'm trying to replace an old ceiling fixture. Reason: one of the bulbs
couldn't be removed and the socket was shot (but the bulb still worked
until this morning).

The old fixture had (2) 60W bulbs -- each with a black and white wire
"hard"-wired to their sockets (it was old). In the ceiling, there are
(2) wires -- 1 black and 1 white (the wiring is old cloth-covered;
originally the house had knob & tube/fuses).

The new fixture I purchased also had (2) 60W bulbs -- each with a black
and white wire (so 4 wires total coming off the new fixture).

Trouble is, when I connect the fixture I can only get (1) bulb to light
-- the black lead bulb. I've tried all black-to-black & all
white-to-white wiring; one white/one black to black (and one white/one
black to white) -- and I get the same result. Then I tried each black
and white on the fixture together and then to the black and white in
the ceiling -- this resulted in nothing (no light) -- and not even a
circuit trip.

Any idea what could be going on?

Thanks for any help/insight you can offer!


I am pretty certain the correct wiring would be all the blacks tied
together and all the whites.

I am confused what you mean by "the black lead bulb".

Is one of the bulbs defective? Replace or switch to see.

There is no switch on the fixture?

Not surprised that you didn't get any light when you tied the blacks and
whites together. You had power on both sides of one bulb and the other
grounded.

This is a place where an ohm meter would be handy to see if you can read
resistance through the fixture wires.

Ceiling fixture help
 

Ceiling fixture help
 

This ceiling fixture is controlled via a single switch. The switch does
not control anything but this fixture -- even though there is at least
one other outlet that loses power when the circuit is off.

The house is 68 years old, but very well taken care of. It's new to me
-- just moved in a couple of weeks ago. This fixture (at least the box
itself) appears to be original to the house.

I though the black wire was hot -- and the white wire was neutral
(return)...

Now remember, this is old, braided (cloth-covered) wire -- and, as
such, it's a bit difficult to tell whether the white is actually white
and the black is actually black (one is simply dingier than the other).

Should I try reversing the connection? Meaning -- maybe I'm wrong and
the black is actually white and vice-versa...


Rich256 wrote:
wrote:
Yeah, that's the weird thing -- I thought the same. So I tried the same
bulb that worked in the other socket -- nothing.

Then I returned the fixture -- and got another one (same
type/replacement) -- and it does the same thing.

Very odd. Doesn't make any sense.

The line doesn't end at this fixture, though -- it goes up to (3) other
fixtures -- and there's also at least one outlet on the same line.

They're all working fine.

Any ideas?


Additional outlets should not make any difference.

A bulb connected between the hot wire (white) and return (black) should
light.

Is this a switched ceiling outlet? If so are you saying there are other
outlets controlled by the same switch?

Ceiling fixture help
 

You are correct, black should be hot, and white, neutral. Try connecting
only the two leads from one socket to the two house wires, if that works try
just the other socket by itself. If one works and the other doesn't , you
have a bad socket



wrote in message
oups.com...
This ceiling fixture is controlled via a single switch. The switch does
not control anything but this fixture -- even though there is at least
one other outlet that loses power when the circuit is off.

The house is 68 years old, but very well taken care of. It's new to me
-- just moved in a couple of weeks ago. This fixture (at least the box
itself) appears to be original to the house.

I though the black wire was hot -- and the white wire was neutral
(return)...

Now remember, this is old, braided (cloth-covered) wire -- and, as
such, it's a bit difficult to tell whether the white is actually white
and the black is actually black (one is simply dingier than the other).

Should I try reversing the connection? Meaning -- maybe I'm wrong and
the black is actually white and vice-versa...


Rich256 wrote:
wrote:
Yeah, that's the weird thing -- I thought the same. So I tried the same
bulb that worked in the other socket -- nothing.

Then I returned the fixture -- and got another one (same
type/replacement) -- and it does the same thing.

Very odd. Doesn't make any sense.

The line doesn't end at this fixture, though -- it goes up to (3) other
fixtures -- and there's also at least one outlet on the same line.

They're all working fine.

Any ideas?


Additional outlets should not make any difference.

A bulb connected between the hot wire (white) and return (black) should
light.

Is this a switched ceiling outlet? If so are you saying there are other
outlets controlled by the same switch?

Ceiling fixture help
 

Ceiling fixture help
 

OK, I've just tried the following:

Connect only (1) lamp socket to the black/white coming from the
ceiling.

One socket lights the lamp, one doesn't.

But the previous light fixture did the same -- and that's why I
returned it (thinking it was a bad socket). I suppose it's possible --
but do you really think I could've picked up the only (2) ceiling
fixtures (same model) in Home Depot that each had a bad socket? It's a
simple, Hampton Bay 2-bulb (75-watt, but I'm using 60) flush "utility"
fixture -- the type you'd use in a basement. The instructions are awful
(I don't think English was the writer's native tongue), so they're
useless. I'll go inspect the fixture and see if I can detect anything
else.

If that fails, I'll try a new (different store, different type) of
fixture tomorrow -- and if that fails, hello electrician!


RBM remove this wrote:
You are correct, black should be hot, and white, neutral. Try connecting
only the two leads from one socket to the two house wires, if that works try
just the other socket by itself. If one works and the other doesn't , you
have a bad socket



wrote in message
oups.com...
This ceiling fixture is controlled via a single switch. The switch does
not control anything but this fixture -- even though there is at least
one other outlet that loses power when the circuit is off.

The house is 68 years old, but very well taken care of. It's new to me
-- just moved in a couple of weeks ago. This fixture (at least the box
itself) appears to be original to the house.

I though the black wire was hot -- and the white wire was neutral
(return)...

Now remember, this is old, braided (cloth-covered) wire -- and, as
such, it's a bit difficult to tell whether the white is actually white
and the black is actually black (one is simply dingier than the other).

Should I try reversing the connection? Meaning -- maybe I'm wrong and
the black is actually white and vice-versa...


Rich256 wrote:
wrote:
Yeah, that's the weird thing -- I thought the same. So I tried the same
bulb that worked in the other socket -- nothing.

Then I returned the fixture -- and got another one (same
type/replacement) -- and it does the same thing.

Very odd. Doesn't make any sense.

The line doesn't end at this fixture, though -- it goes up to (3) other
fixtures -- and there's also at least one outlet on the same line.

They're all working fine.

Any ideas?


Additional outlets should not make any difference.

A bulb connected between the hot wire (white) and return (black) should
light.

Is this a switched ceiling outlet? If so are you saying there are other
outlets controlled by the same switch?

Ceiling fixture help
 

Ceiling fixture help
 

I could buy one -- but I'm not sure how to use one.

I figure I'll try another store -- and a different fixture from a
different manufacturer. All I'm installing is a simple 2-bulb utility
(basement) ceiling light.

If that behaves the same as these (2), then I can be pretty sure it's
not the fixtures -- but the wiring in the ceiling itself. And, if
that's the case, I'll need a pro to help correct it.

Thanks for all your help -- I'll let you know what happens come
tomorrow...

Rich256 wrote:
wrote:
OK, I've just tried the following:

Connect only (1) lamp socket to the black/white coming from the
ceiling.

One socket lights the lamp, one doesn't.

But the previous light fixture did the same -- and that's why I
returned it (thinking it was a bad socket). I suppose it's possible --
but do you really think I could've picked up the only (2) ceiling
fixtures (same model) in Home Depot that each had a bad socket? It's a
simple, Hampton Bay 2-bulb (75-watt, but I'm using 60) flush "utility"
fixture -- the type you'd use in a basement. The instructions are awful
(I don't think English was the writer's native tongue), so they're
useless. I'll go inspect the fixture and see if I can detect anything
else.

If that fails, I'll try a new (different store, different type) of
fixture tomorrow -- and if that fails, hello electrician!


Aw, don't give up that easy!!

Could very well be that there is a break in the wire on one of the lamps.

A meter such as those you can often get at half price (about $5) from
Harbor Freight would tell you if there is. Have any friends that has a
meter?

Ceiling fixture help
 

If you bought it at HD and it's the same make and model, I wouldn't be
surprised if you find all the rest of that make and model to be just as
defective



wrote in message
ups.com...
OK, I've just tried the following:

Connect only (1) lamp socket to the black/white coming from the
ceiling.

One socket lights the lamp, one doesn't.

But the previous light fixture did the same -- and that's why I
returned it (thinking it was a bad socket). I suppose it's possible --
but do you really think I could've picked up the only (2) ceiling
fixtures (same model) in Home Depot that each had a bad socket? It's a
simple, Hampton Bay 2-bulb (75-watt, but I'm using 60) flush "utility"
fixture -- the type you'd use in a basement. The instructions are awful
(I don't think English was the writer's native tongue), so they're
useless. I'll go inspect the fixture and see if I can detect anything
else.

If that fails, I'll try a new (different store, different type) of
fixture tomorrow -- and if that fails, hello electrician!


RBM remove this wrote:
You are correct, black should be hot, and white, neutral. Try connecting
only the two leads from one socket to the two house wires, if that works
try
just the other socket by itself. If one works and the other doesn't , you
have a bad socket



wrote in message
oups.com...
This ceiling fixture is controlled via a single switch. The switch does
not control anything but this fixture -- even though there is at least
one other outlet that loses power when the circuit is off.

The house is 68 years old, but very well taken care of. It's new to me
-- just moved in a couple of weeks ago. This fixture (at least the box
itself) appears to be original to the house.

I though the black wire was hot -- and the white wire was neutral
(return)...

Now remember, this is old, braided (cloth-covered) wire -- and, as
such, it's a bit difficult to tell whether the white is actually white
and the black is actually black (one is simply dingier than the other).

Should I try reversing the connection? Meaning -- maybe I'm wrong and
the black is actually white and vice-versa...


Rich256 wrote:
wrote:
Yeah, that's the weird thing -- I thought the same. So I tried the
same
bulb that worked in the other socket -- nothing.

Then I returned the fixture -- and got another one (same
type/replacement) -- and it does the same thing.

Very odd. Doesn't make any sense.

The line doesn't end at this fixture, though -- it goes up to (3)
other
fixtures -- and there's also at least one outlet on the same line.

They're all working fine.

Any ideas?


Additional outlets should not make any difference.

A bulb connected between the hot wire (white) and return (black)
should
light.

Is this a switched ceiling outlet? If so are you saying there are
other
outlets controlled by the same switch?

Ceiling fixture help
 

On 11 Jan 2007 19:21:49 -0800, wrote:

Sorry -- my bad explanation.

Yes, I've tried all the blacks together -- and all the whites -- and I

That is the only way you should connect it. The results of other ways
are "unpredictable". :) But may melt some wires before the breaker
has a chance to trip.

still only get (1) bulb. There is a single switch that controls the
fixture. But the line continues upstairs to (3) other lights (all
controlled by their own switches) -- and there is at least one outlet
on the same run.

None of this matters. Nor does the age of the house or its condition.
If one bulb lights you have electricity between those two wires that
come out of the ceiling. If one socket doesn't light and you know the
bulb is good (You tested the bulb before putting it in that socket,
but to be certain you should test it after also.) then it is the
socket.

Although it is very unusual for a new socket not to work, it is not
like flipping a coin where getting heads the first time has no effect
on the second time. If they made one bad socket, it's not so unlikely
that they use a defective system for making sockets, so it's not so
surprising that the next one doesn't work. Even though the factory is
far away, the assmbly line puts them in cartons in sequence as they
are made, and your two fixtures probably came out of the same carton.

I switched the bulbs (put the working one in the non-working socket) --
and, I even returned the fixture (thinking the socket was faulty).

New replacement fixture = same result.

Can't figure it out...

Ceiling fixture help
 

Ceiling fixture help
 

On 11 Jan 2007 18:52:02 -0800, wrote:

I'm trying to replace an old ceiling fixture. Reason: one of the bulbs
couldn't be removed and the socket was shot (but the bulb still worked
until this morning).

The old fixture had (2) 60W bulbs -- each with a black and white wire
"hard"-wired to their sockets (it was old). In the ceiling, there are
(2) wires -- 1 black and 1 white (the wiring is old cloth-covered;
originally the house had knob & tube/fuses).

The new fixture I purchased also had (2) 60W bulbs -- each with a black
and white wire (so 4 wires total coming off the new fixture).

Trouble is, when I connect the fixture I can only get (1) bulb to light
-- the black lead bulb. I've tried all black-to-black & all
white-to-white wiring; one white/one black to black (and one white/one
black to white) -- and I get the same result. Then I tried each black
and white on the fixture together and then to the black and white in
the ceiling -- this resulted in nothing (no light) -- and not even a
circuit trip.

Any idea what could be going on?

Thanks for any help/insight you can offer!

I don't suppose the fixture has a little
pull-chain rotary switch that determines
how many of the bulbs are on, or anything?

--Goedjn

Ceiling fixture help
 

I think you are in over your head.

Ceiling fixture help
 

Ceiling fixture help
 

On Fri, 12 Jan 2007 23:43:05 GMT, Rich256 wrote:

wrote:
I think you are in over your head.

Not really. I had the same thoughts that there might be a switch of
some sort that he missed. Gotta be something wrong with the fixture.
Am very curious as to what he found. Never know what it might be.

I bought a chain saw a while ago. It was all assembled ready to use.

I bought a chain saw, and I kept trying to pull the chain to turn it
on. But it didnt' work.

Didn't cut worth a damn. Took a closer look and saw the chain had
been installed backwards.

My chain was backwards, too, bought at a yard sale. I wonder if that
is why they got rid of it.

I commented about it at the hardware and they
casually said those things "happen".

Ceiling fixture help
 

mm wrote:
On Fri, 12 Jan 2007 23:43:05 GMT, Rich256 wrote:

wrote:
I think you are in over your head.

Not really. I had the same thoughts that there might be a switch of
some sort that he missed. Gotta be something wrong with the fixture.
Am very curious as to what he found. Never know what it might be.

I bought a chain saw a while ago. It was all assembled ready to use.

I bought a chain saw, and I kept trying to pull the chain to turn it
on. But it didnt' work.

Didn't cut worth a damn. Took a closer look and saw the chain had
been installed backwards.

My chain was backwards, too, bought at a yard sale. I wonder if that
is why they got rid of it.

I commented about it at the hardware and they
casually said those things "happen".




What's that old joke? Took the chain saw back because it didn't work
worth a damn. The guy at the store takes a look at it, pulls the rope
and the customer says "What's that noise!!".