rotted sill +wood filler question:help please
 

I have several partially rotted sills and sill noses on my windows. Does the
wood hardner and wood fillers on the market work to harden the soft spots
and fill in the real rotted portions. Any hints on how to use them before I
get going. Any suggestions would be appreciated. Thanks

John

rotted sill +wood filler question:help please
 

John W wrote:
I have several partially rotted sills and sill noses on my windows. Does the
wood hardner and wood fillers on the market work to harden the soft spots
and fill in the real rotted portions. Any hints on how to use them before I
get going. Any suggestions would be appreciated. Thanks

John

Yes they work but they're not cheap...

if volume of wood repair is large..... often removal & replacement with
real wood is cheaper & faster.

Epoxies are better (but way more expensive) than Bondo (ester resins)

www.abatron.com

Where are you located? I've used the wood repair products with great
success in SoCal but in very wet environments complete epoxy coverage
of wood sills can trap moisture & cause other problems.

cheers
Bob

rotted sill +wood filler question:help please
 

BobK207 wrote:
John W wrote:
I have several partially rotted sills and sill noses on my windows. Does the
wood hardner and wood fillers on the market work to harden the soft spots
and fill in the real rotted portions. Any hints on how to use them before I
get going. Any suggestions would be appreciated. Thanks

John

Yes they work but they're not cheap...

if volume of wood repair is large..... often removal & replacement with
real wood is cheaper & faster.

Epoxies are better (but way more expensive) than Bondo (ester resins)
.
www.abatron.com

Where are you located? I've used the wood repair products with great
success in SoCal but in very wet environments complete epoxy coverage
of wood sills can trap moisture & cause other problems.

cheers
Bob

To add to Bob's comments.
I've used the same epoxy system with good results in Charleston South
Carolina.
As Bob says, the wood has to be dry.
If it is not, the spores and moisture in the wood go to work around the
repair.
One has to follow directions exactly.
I've had a couple of instances of creative mixing and application go
wrong.
TB

rotted sill +wood filler question:help please
 

John W wrote:
I have several partially rotted sills and sill noses on my windows. Does the
wood hardner and wood fillers on the market work to harden the soft spots
and fill in the real rotted portions. Any hints on how to use them before I
get going. Any suggestions would be appreciated. Thanks

John

MinWax makes a kit that works well on small areas. I have some decent
repairs a few years old. Just buy the kit, read and follow the
directions and try to mitigate the water problem that may have started
it in the first place, bad flashing, etc. Good luck.

Joe

rotted sill +wood filler question:help please
 

John W wrote:
I have several partially rotted sills and sill noses on my windows. Does the
wood hardner and wood fillers on the market work to harden the soft spots
and fill in the real rotted portions. Any hints on how to use them before I
get going. Any suggestions would be appreciated. Thanks

John

Greetings,

If your windows are rotting outside just cap them with metal. Who
cares what happens under the metal where no one can see?

When Bondo costs too much because of the volume of wood to repair I
have been able to screw down into the good wood and leave the screws
heads sticking way out into the large chunk of missing wood. Then I
use stiff Type M masonry mortar (you don't want it to shrink) to fill
in the rotted area and keep it moist for about 72 hours (tape an empty
cheese-puf bag over it or something). The rotted area must be a large
chunk without thin spots. If the shape of the stricken area is not a
large chunk use a minimum of a 1.5" hole saw to make a large missing
chunk without any "thin" areas. This is the cheapest way per cubic
foot that actually works. If your budget is slightly more but still
way less than bondo then you might mix your mortar with some latex
admixture. If you paint your finished product no one will be able to
tell.

Hope this helps,
William

rotted sill +wood filler question:help please
 

John W wrote:
I have several partially rotted sills and sill noses on my windows. Does the
wood hardner and wood fillers on the market work to harden the soft spots
and fill in the real rotted portions. Any hints on how to use them before I
get going. Any suggestions would be appreciated. Thanks

John

I've removed a few, exterior, and replaced with pressure treated wood
scraps I had laying around. Not an exact fit with a little cutting but
after caulk and painting you'd never know the difference.
Frank

rotted sill +wood filler question:help please
 

In article ,
says...
I have several partially rotted sills and sill noses on my windows. Does the
wood hardner and wood fillers on the market work to harden the soft spots
and fill in the real rotted portions. Any hints on how to use them before I
get going. Any suggestions would be appreciated. Thanks

I've had good results with: http://www.rotdoctor.com/.

--
Keith