My water heater pilot light keeps going out
Twice tonight, I've had to restart the pilot light on my gas water
heater. It always starts right back up, and heats the water up just fine. But this is twice now that I've had to do it. I also have a gas boiler (with a pilot light) and a gas stove (ignitors, no pilot light), and these two items seem to be functioning normally. The water heater is an "A.O. Smith Promax" and the only date I can find on it is "11/03", but I can't tell if that is installation date or a service date. It *looks* fairly new (i.e., within the last 5 years) but I don't really know how to tell. What should I do? Thanks. -phaeton |
My water heater pilot light keeps going out
"phaeton" writes:
Twice tonight, I've had to restart the pilot light on my gas water heater. It always starts right back up, and heats the water up just fine. But this is twice now that I've had to do it. I also have a gas boiler (with a pilot light) and a gas stove (ignitors, no pilot light), and these two items seem to be functioning normally. The water heater is an "A.O. Smith Promax" and the only date I can find on it is "11/03", but I can't tell if that is installation date or a service date. It *looks* fairly new (i.e., within the last 5 years) but I don't really know how to tell. What should I do? If your water heater has a standing pilot it also has a thermocouple that controls the gas flow. If the thermocouple isn't hot, it will turn off the gas flow so a blown out pilot doesn't cause the house to fill with gas. These thermocouples routinely go bad after a few years. So that's one possibility. Another possibility with water heaters is tank failure, and a slow leak or condensation or something causing water to drip on the pilot. Those are probably the two biggest causes I'm aware of for pilot failure. Thermocouples are pretty easy to change and available at hardware stores. Measure the length of the thermocouple that you have and that should lead you to a decent replacement. If you're not comfy with this, get a pro in to check what's going on, or if it's been 10 years, just replace the water heater--it's probably due. -- Todd H. http://www.toddh.net/ |
My water heater pilot light keeps going out
Todd H. wrote: "phaeton" writes: Twice tonight, I've had to restart the pilot light on my gas water heater. It always starts right back up, and heats the water up just fine. But this is twice now that I've had to do it. I also have a gas boiler (with a pilot light) and a gas stove (ignitors, no pilot light), and these two items seem to be functioning normally. The water heater is an "A.O. Smith Promax" and the only date I can find on it is "11/03", but I can't tell if that is installation date or a service date. It *looks* fairly new (i.e., within the last 5 years) but I don't really know how to tell. What should I do? If your water heater has a standing pilot it also has a thermocouple that controls the gas flow. If the thermocouple isn't hot, it will turn off the gas flow so a blown out pilot doesn't cause the house to fill with gas. These thermocouples routinely go bad after a few years. So that's one possibility. Another possibility with water heaters is tank failure, and a slow leak or condensation or something causing water to drip on the pilot. Those are probably the two biggest causes I'm aware of for pilot failure. Thermocouples are pretty easy to change and available at hardware stores. Measure the length of the thermocouple that you have and that should lead you to a decent replacement. If you're not comfy with this, get a pro in to check what's going on, or if it's been 10 years, just replace the water heater--it's probably due. -- Todd H. http://www.toddh.net/ Also, since it appears to be an 03 tank, if it is the thermocouple, get the serial # and give the manufacturer a call, as it's likely under warranty. When I did that with my Reliance WH, they sent me a new one for free in 2 days. |
My water heater pilot light keeps going out
On 10 Dec 2006 20:45:18 -0800, "phaeton"
wrote: Twice tonight, I've had to restart the pilot light on my gas water heater. It always starts right back up, and heats the water up just fine. But this is twice now that I've had to do it. I also have a gas boiler (with a pilot light) and a gas stove (ignitors, no pilot light), and these two items seem to be functioning normally. The water heater is an "A.O. Smith Promax" and the only date I can find on it is "11/03", but I can't tell if that is installation date or a service date. It *looks* fairly new (i.e., within the last 5 years) but I don't really know how to tell. What should I do? Thanks. -phaeton IMHO: You can check if your draft deflector is blocked, but other than that, you should have a professional check your water heater. Good luck, tom @ www.FreelancingProjects.com |
My water heater pilot light keeps going out
Tom The Great wrote: IMHO: You can check if your draft deflector is blocked, but other than that, you should have a professional check your water heater. Good luck, tom @ www.FreelancingProjects.com I may have to do that. I know that thermocouples aren't horrendously expensive, but I don't have a clue as to how to get at it in the water heater. From the little pilot light inspection window it appears to be on the backside of the unit, but there is no access panel anywhere on the bottom. I had a feeling it was the thermocouple (last year our gas boiler was serviced, and I asked lots of questions about how gas appliances work, etc). Something else I'm noting- Lately the part of the house that has all the gas appliances (it's a small 900 sqft house) has had a very faint smell of gas in the air. So very faint, but I'm so paranoid about these things that I can always smell it. ;) My guess is that the water heater pilot light goes out for whatever reason, but it takes the thermocouple something like 10 or 15 seconds to cool down to the point where it actually shuts the gas off. Thus releasing a small but barely detectable amount of gas into the place. Sound reasonable? If you call the gas company, won't they come out with a more sophisticated device than my nose and 'sniff' around the place to find any potential leaks, even if they're very small? Thanks again. -phaeton |
My water heater pilot light keeps going out
phaeton wrote:
Tom The Great wrote: IMHO: You can check if your draft deflector is blocked, but other than that, you should have a professional check your water heater. Good luck, tom @ www.FreelancingProjects.com I may have to do that. I know that thermocouples aren't horrendously expensive, but I don't have a clue as to how to get at it in the water heater. From the little pilot light inspection window it appears to be on the backside of the unit, but there is no access panel anywhere on the bottom. I had a feeling it was the thermocouple (last year our gas boiler was serviced, and I asked lots of questions about how gas appliances work, etc). Something else I'm noting- Lately the part of the house that has all the gas appliances (it's a small 900 sqft house) has had a very faint smell of gas in the air. So very faint, but I'm so paranoid about these things that I can always smell it. ;) While you're waiting for the pro, I hope you have already taken a spray bottle filled with water and a small amount of dish washing liquid and sprayed every joint of every gas pipe you can access. Look for bubbles. Paul in San Francisco |
All times are GMT +1. The time now is 10:42 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter