Garage Door Does Not Stay Up When Manually Opened Fully
11-10-06, 9:26 AM EST
-Garage Door Does Not Stay Up When Manually Opened Fully -It comes down about couple of feet & settles there -This causes problem for my minivan to come out when we loose power -There is no problem in opening & closing using the Opener -dave |
Garage Door Does Not Stay Up When Manually Opened Fully
Clear this up for me....
so, when you hit the button it opens fully then comes back down a few feet? But, when you hit the remote button it works the way it should? |
Garage Door Does Not Stay Up When Manually Opened Fully
|
Garage Door Does Not Stay Up When Manually Opened Fully
three things you can do:
1. re-engage the opener with it open. (this would only work with a genie screw drive) 2. adjust your springs. 3. use a pair of vise grips to hold it open -- Steve Barker wrote in message oups.com... wrote: Clear this up for me.... so, when you hit the button it opens fully then comes back down a few feet? But, when you hit the remote button it works the way it should? -When I say "manually open", I mean that i pull the rope to dislodge the electric-opener. Then i manually push the door up all the way. then i let go and the door slides down by about couple of feet! -there is no problem using with the electric opener. i can press button on the remote or the switch mounted near the door, either way the door opens and closes fully w/o any problem -thanks for your interest. i appreciate it. |
Garage Door Does Not Stay Up When Manually Opened Fully
11-10-06, 12:19pm est
-thanks for the 3 tips -i have stanley brand and i have torsion springs on the top -it seems obvious that i better use vise-grips -like jeff said, i don't want to be an angel -may use these grips till i find someone to adjust these torsion springs -thanks larry, steve & jeff -you have been a great help -i appreciate it -dave Steve Barker LT wrote: three things you can do: 1. re-engage the opener with it open. (this would only work with a genie screw drive) 2. adjust your springs. 3. use a pair of vise grips to hold it open -- Steve Barker wrote in message oups.com... wrote: Clear this up for me.... so, when you hit the button it opens fully then comes back down a few feet? But, when you hit the remote button it works the way it should? -When I say "manually open", I mean that i pull the rope to dislodge the electric-opener. Then i manually push the door up all the way. then i let go and the door slides down by about couple of feet! -there is no problem using with the electric opener. i can press button on the remote or the switch mounted near the door, either way the door opens and closes fully w/o any problem -thanks for your interest. i appreciate it. |
All times are GMT +1. The time now is 03:38 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter