Painting a purple table white - what kind of primer?
We have this ugly old table we'd like to paint white but we were
wondering what kind of primer would work best. |
Painting a purple table white - what kind of primer?
I'd guess oil-based Kilz. Requires ventilation.
Joe wrote: We have this ugly old table we'd like to paint white but we were wondering what kind of primer would work best. |
Painting a purple table white - what kind of primer?
First, get the sucker clean. TSP, soap and water, etc. A good detergent. Then sand lightly to "break" the current finish. Fill in any dings, etc. Get the surface nice and smooth. As to primers, you are likely going over an oil paint, so see what is around for just that purpose, assuming you are going for a modern latex paint. I've used outside semi-gloss paint as a primer, as it has lots of pigment, and bonds well. A coat of that, and then a couple of coats of your finish gloss, or semi-gloss enamel. You might be quite amazed how much it is going to take to kill that purple paint! There is also a wall primer for going over colored walls called KILZ, I believe, See if they have a primer that would meet your needs. Lowes or Home Depot are your best bests. I might even consider two coats of primer, and some light sanding between coats to smooth things up. Make sure things are DRY before you put on the next coat. At least overnight, and longer if you are working in the garage where it is cold. |
Painting a purple table white - what kind of primer?
Joe wrote:
We have this ugly old table we'd like to paint white but we were wondering what kind of primer would work best. A white one. -- dadiOH ____________________________ dadiOH's dandies v3.06... ....a help file of info about MP3s, recording from LP/cassette and tips & tricks on this and that. Get it at http://mysite.verizon.net/xico |
Painting a purple table white - what kind of primer?
A white, oil based primer will work the best. But since you will most
likely have way more primer than you need (no matter what kind you buy) you can always coat it enough times until you can't see through it. Better yet would be to use a heat gun to remove the old paint, then sand, then prime and paint. |
Painting a purple table white - what kind of primer?
Joe wrote: We have this ugly old table we'd like to paint white but we were wondering what kind of primer would work best. Try a low-voc transitional primer such a AFM's so you can transition from the old stuff to a nice new surface that you can paint with a good no-voc paint - such as ICI's or AFM's. Yorick www.SaferBuilding.com |
All times are GMT +1. The time now is 03:29 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter