Murray Lawn tractor wont go into gear
It started when I went to cut the grass. I put it into gear and
started to roll, and low and behold one of the tires was flat . I put the rear of the tractor on a railroad tye to hold it up while I removed the tire. I then brought the tire to have a tube put in it.The next day I picked up the tire and brought it home and put it back on the tractor and removed the railroad tye. I then started it up and put it into gear forwards nothing rear nothing... What gives ? Thanks Ed |
Murray Lawn tractor wont go into gear
If the wheel is like the one on my old Craftsman tractor, it is coupled
to the axle by a locking "pin". This is a 2" long piece of steel, 3/16" on the other two dimensions. It fits into a groove on the axle and in the wheel. Look around on the floor and hopefully you'll find it. I went through exactly the same scenario in the Spring! Ed wrote: It started when I went to cut the grass. I put it into gear and started to roll, and low and behold one of the tires was flat . I put the rear of the tractor on a railroad tye to hold it up while I removed the tire. I then brought the tire to have a tube put in it.The next day I picked up the tire and brought it home and put it back on the tractor and removed the railroad tye. I then started it up and put it into gear forwards nothing rear nothing... What gives ? Thanks Ed |
All times are GMT +1. The time now is 02:59 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter