DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Refinishing patio concrete-slab (https://www.diybanter.com/home-repair/180003-refinishing-patio-concrete-slab.html)

gary October 21st 06 11:11 PM

Refinishing patio concrete-slab
 
I live in Riverside, California (halfway between Los Angeles and Palm
Springs).

My house is 35 years old.

Six or seven times during this period, I've applied UN-DILUTED Muriatic
Acid to clean the concrete slab on my patio. Now the slab is now very
rough (it hurts to walk on with bare feet).

Although I can't pour another thick layer of concrete over the existing
slab, can I apply a thin overlay to cover the old, dirty, stained and
pitted concrete to result in a smoother and good-looking slab?

Can a fairly-knowledgeable homeowner do this project?

What product(s) are needed?

What steps are involved?

How durable is the overlay? (The concrete slab is hosed off several
times a week to remove leaves and dirt. Also, the patio is surrounded
by flower beds, potted plants are on the slab and hanging pots are
above the patio. All get watered several times a week).

How long will the overlay last?


[email protected] October 23rd 06 03:57 PM

Refinishing patio concrete-slab
 
gary wrote:
I live in Riverside, California (halfway between Los Angeles and Palm
Springs).


My house is 35 years old.


Six or seven times during this period, I've applied UN-DILUTED Muriatic
Acid to clean the concrete slab on my patio. Now the slab is now very
rough (it hurts to walk on with bare feet).


OK, first off: STOP THAT.

What you've done is etch away to cement and exposed the sand and
aggregate. Over time this will wear smooth again, but you may not want to
wait.

Although I can't pour another thick layer of concrete over the existing
slab, can I apply a thin overlay to cover the old, dirty, stained and
pitted concrete to result in a smoother and good-looking slab?


Rent a concrete floor grinder and you should be able to take off the high
spots: then relax and stop typing to keep the concrete pristine white: let
it gain character and -be- the zero maintenance surface it's supposed to
be.

Overlays and coatings are a crummy solution to the problem IMHO.



John
--
Remove the dead poet to e-mail, tho CC'd posts are unwelcome.
Mean People Suck - It takes two deviations to get cool.
Ask me about joining the NRA.


All times are GMT +1. The time now is 05:06 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter