Furnace not functioning properly
 

Hi,

My furnace is about 6 months old and we started using it just last
month. I replaced my analog thermostat with a digital one (Honeywell
CT3200). I've programmed it to go down to 17C when I'm not home and
after 6PM to go back to 24C. However, when we got home last night at
10PM it was 17C. I tried clicking 'Run Program' and the furnace made a
clicking sound (3 clicks) but no hot air just a humming sound and that
even stopped. Then I clicked on 'Warmer' button and raised the
temperature setting to 24C. It ran for 10-15 seconds and then it
stopped. Clicked on 'Run Program' again and same thing. All you hear is
the clicking sound. The furnace makes a humming sound but no air. So as
the last option I clicked on 'Warmer' button and raised the setting 24C
and clicked 'Hold Temp' and then the furnace began working fine. This
morning I woke up and it was on 24C as set. So raising the temperature
to 24 failed, clicking on Run Program failed but raising the
temperature and clicking hold works. Anyone knows what could be causing
this? Is it the thermostat or the furnace? Also, the blinking lights in
the furnace indicate that it's running normal.

Also, there is this setting in my thermostat that says
'High-efficiency furnace such as a 90% or greater AFUE (unit) must use
this setting and under 90% must use this setting. Could this be causing
it?


Your help is greatly appreciated.

Thanks
Maz.

Furnace not functioning properly
 

Furnace not functioning properly
 

wrote in message

Also, there is this setting in my thermostat that says
'High-efficiency furnace such as a 90% or greater AFUE (unit) must use
this setting and under 90% must use this setting. Could this be causing
it?

Well . . . . . . .

Furnace not functioning properly