Cleaning dried acrylic latex off bricks.
 

Hello,
My driveway is paved with red and gray bricks. Due to a porcelain tile
laying project on my front door stairs, some of the bricks got stained
with a diluted mixture of Keraply (R) (an acrylic latex dry-set mortar
additive) and porcelain powder (from tile cutting). How do I clean up
the stains? I called Mapei, the manufacturer of Keraply, and the
technician who answered doesn't have a sure solution. He suggests,
however, that hydrochloric acid (a.k.a. muriatic acid) may do the job
but that I should check with a masonry/brick laying expert.

Would somebody know the answer? Would vinegar also work? (I know that
vinegar is a much less potent acidic solution than hydrochloric acid,
but I simply have way too much white vinegar at home.)

Cleaning dried acrylic latex off bricks.
 

On 10 Oct 2006 13:21:00 -0700, "SwordAngel"
wrote:

Hello,
My driveway is paved with red and gray bricks. Due to a porcelain tile
laying project on my front door stairs, some of the bricks got stained
with a diluted mixture of Keraply (R) (an acrylic latex dry-set mortar
additive) and porcelain powder (from tile cutting). How do I clean up
the stains? I called Mapei, the manufacturer of Keraply, and the
technician who answered doesn't have a sure solution. He suggests,
however, that hydrochloric acid (a.k.a. muriatic acid) may do the job
but that I should check with a masonry/brick laying expert.

Would somebody know the answer? Would vinegar also work? (I know that
vinegar is a much less potent acidic solution than hydrochloric acid,
but I simply have way too much white vinegar at home.)

Whatever condenses out of oil-furnace exhaust is an
EXCELLENT mortar solvent, and doesn't seem to degrade
actual bricks much. That's what, sulferic acid?

Cleaning dried acrylic latex off bricks.
 

Have you tried a powerwasher? Not too close though.


"SwordAngel" wrote in message
oups.com...
Hello,
My driveway is paved with red and gray bricks. Due to a porcelain tile
laying project on my front door stairs, some of the bricks got stained
with a diluted mixture of Keraply (R) (an acrylic latex dry-set mortar
additive) and porcelain powder (from tile cutting). How do I clean up
the stains? I called Mapei, the manufacturer of Keraply, and the
technician who answered doesn't have a sure solution. He suggests,
however, that hydrochloric acid (a.k.a. muriatic acid) may do the job
but that I should check with a masonry/brick laying expert.

Would somebody know the answer? Would vinegar also work? (I know that
vinegar is a much less potent acidic solution than hydrochloric acid,
but I simply have way too much white vinegar at home.)

Cleaning dried acrylic latex off bricks.
 

SwordAngel wrote:
Hello,
My driveway is paved with red and gray bricks. Due to a porcelain tile
laying project on my front door stairs, some of the bricks got stained
with a diluted mixture of Keraply (R) (an acrylic latex dry-set mortar
additive) and porcelain powder (from tile cutting). How do I clean up
the stains? I called Mapei, the manufacturer of Keraply, and the
technician who answered doesn't have a sure solution. He suggests,
however, that hydrochloric acid (a.k.a. muriatic acid) may do the job
but that I should check with a masonry/brick laying expert.

Would somebody know the answer? Would vinegar also work? (I know that
vinegar is a much less potent acidic solution than hydrochloric acid,
but I simply have way too much white vinegar at home.)

Some acrylic latexes are kept in suspension with ammonia based systems,
so try some undiluted household ammonia first and scrub vigorously. If
that is ineffective, then switching to a strong acid should be tried
next. Vinegar is too weak to be at all effective. Oxalic acid, a common
component of old fashioned auto radiator flushes ought to work better,
though slow. It will have less effect on brick mortar than
hydrochloric, which you may still have to apply as the last resort.
Good luck.

Joe

Cleaning dried acrylic latex off bricks.
 

Oxalic acid is highly toxic so be careful with it.



"Joe" wrote in message
oups.com...

SwordAngel wrote:
Hello,
My driveway is paved with red and gray bricks. Due to a porcelain tile
laying project on my front door stairs, some of the bricks got stained
with a diluted mixture of Keraply (R) (an acrylic latex dry-set mortar
additive) and porcelain powder (from tile cutting). How do I clean up
the stains? I called Mapei, the manufacturer of Keraply, and the
technician who answered doesn't have a sure solution. He suggests,
however, that hydrochloric acid (a.k.a. muriatic acid) may do the job
but that I should check with a masonry/brick laying expert.

Would somebody know the answer? Would vinegar also work? (I know that
vinegar is a much less potent acidic solution than hydrochloric acid,
but I simply have way too much white vinegar at home.)

Some acrylic latexes are kept in suspension with ammonia based systems,
so try some undiluted household ammonia first and scrub vigorously. If
that is ineffective, then switching to a strong acid should be tried
next. Vinegar is too weak to be at all effective. Oxalic acid, a common
component of old fashioned auto radiator flushes ought to work better,
though slow. It will have less effect on brick mortar than
hydrochloric, which you may still have to apply as the last resort.
Good luck.

Joe

Cleaning dried acrylic latex off bricks.
 

Paint remover should work. Or the Goof Off all purpose remover. One
unknown is how clean looking the other bricks are. Whatever you use to
remove the paint may result in that area being much cleaner looking.
In which case, you'll need to power wash the whole thing, which should
make it uniform again.