DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   RE Furnace Filters on Steroids (https://www.diybanter.com/home-repair/177498-re-furnace-filters-steroids.html)

Robert Gammon September 28th 06 03:24 PM

RE Furnace Filters on Steroids
 
Remember, HEPA filters like the one I described will take their OWN 1
HP fan to push the air thru them at the required rate. Your furnace fan
has not a prayer doing this. $220 for the filter, several hundred more
for the second fan, ??? for the install ??

Yes, a MERV 7 1" or 2"in front of this catches most of the junk and lets
the HEPA filter last longer,but you MUST remember to change the pre
filter regularly, perhaps more often than than you change your existing
filter.

A step down from this is NOT a shallower HEPA filter. A 6 inch deep
version will NOT provide nearly the same level of filtering or the flow
required.

The step down is to get a MERV 12 Purolator Defiant Extended Surface bag
filter. Change this annually as a part of the HVAC inspection. These
24x24x19 6 pocket filters have 42 sq ft of 0.25 thick filter media. They
will capture 75-80% of the 0.3 micron stuff (vs 99.97% for HEPA). $28
for the filter, Roughly $100 for the mounting hardware, ?? for the
install ??



All times are GMT +1. The time now is 02:20 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter