Craftsman lawn tractor wiring
I've just replaced the engine on my 18.5 hp Craftsman lawn tractor. It
has a Briggs engine (31P7770296E1, 18.5 hp OHV Intek Plus). Although I replaced the engine with the exact same model number there is one wire configured differently on the new engine. The old engine had one wire attached from the flywheel to the regulator. The new engine has two wires connected to the flywheel. I'm assuming one is a hot wire to the regulator the same as the original engine and that the other wire is a ground. Can anyone provide any information on this or direct me to a schematic? Thanks, Darrell |
Craftsman lawn tractor wiring
I ran into that when I changed a 12.5 Briggs with a newer one. I really don't remember which one I used, I just started it up and checked the leads with a volt meter. I used the one with the voltage. |
All times are GMT +1. The time now is 07:52 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter