frayed electrical wire behind kitchen stove/microwave
 

Ive just moved into a 95' home and attempted to replace the hood over
the range with a microwave. I disconnected the hood, cut an opening for
the box and was attempting to install the box when i realized that the
drywall was broken open enough and i couldnt lock the paddles in place
to secure the box. I called a friend who had recently done this and he
told me to screw a drywall screw through the box into the side of the
2x4 behind the wall. when i did this the threads on the screw frayed
the insulation to either the range or hood wire that was stapled to the
2x4. Im not sure which one and there doesnt appear to be any damage to
the wire itself. Is there any repair i can make to this or will i have
to rip everything out to replace the wire? Please Help!

frayed electrical wire behind kitchen stove/microwave
 

There is a good possibility that you did no damage to the cable, especially
if you only nicked the outer sheath. The bigger question is whether you ran
a dedicated circuit for the microwave as is required or are you attempting
to use the existing branch circuit that fed the hood.


wrote in message
oups.com...
Ive just moved into a 95' home and attempted to replace the hood over
the range with a microwave. I disconnected the hood, cut an opening for
the box and was attempting to install the box when i realized that the
drywall was broken open enough and i couldnt lock the paddles in place
to secure the box. I called a friend who had recently done this and he
told me to screw a drywall screw through the box into the side of the
2x4 behind the wall. when i did this the threads on the screw frayed
the insulation to either the range or hood wire that was stapled to the
2x4. Im not sure which one and there doesnt appear to be any damage to
the wire itself. Is there any repair i can make to this or will i have
to rip everything out to replace the wire? Please Help!

frayed electrical wire behind kitchen stove/microwave
 

i am using the existing wiring that was used for the hood but checked
all outlets in kitchen after i turned off the breaker and did not find
any other connections

frayed electrical wire behind kitchen stove/microwave
 

As per 1995 NEC you wouldn't find any of the kitchen outlets on that
circuit. You would however find lights and possibly outlets in other rooms
connected to it. Unless you have a dedicated circuit, you will probably have
trouble


wrote in message
oups.com...
i am using the existing wiring that was used for the hood but checked
all outlets in kitchen after i turned off the breaker and did not find
any other connections

frayed electrical wire behind kitchen stove/microwave
 

will electrical tape fix the problem in this case

frayed electrical wire behind kitchen stove/microwave
 

the breaker box says kit gfci & island hood. if there are other
circuits connected to it, it should trip are gfci right. of is there a
chance of fire

frayed electrical wire behind kitchen stove/microwave
 

I wouldn't worry about fire, just overloading the circuit and tripping the
breaker. The island hood should not be wired to any kitchen outlets, so
check carefully to find what may be on the circuit that your using for the
microwave.


wrote in message
ups.com...
the breaker box says kit gfci & island hood. if there are other
circuits connected to it, it should trip are gfci right. of is there a
chance of fire

frayed electrical wire behind kitchen stove/microwave
 

thank you so much for your help, i have just one more question, i went
to go check the wire one last time and the wire is pinched between the
2x4 and the drywall going to the other side of the cabinet. is tape
absolutely necesary (probably so) i just dont see how i can wrap the
tape around the wire

frayed electrical wire behind kitchen stove/microwave
 

I wouldn't worry about it unless you've cut it to the point that copper is
exposed.
wrote in message
ps.com...
thank you so much for your help, i have just one more question, i went
to go check the wire one last time and the wire is pinched between the
2x4 and the drywall going to the other side of the cabinet. is tape
absolutely necesary (probably so) i just dont see how i can wrap the
tape around the wire