DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Prime Backside Of Siding ? (https://www.diybanter.com/home-repair/171618-prime-backside-siding.html)

Robert11 August 6th 06 02:40 PM

Prime Backside Of Siding ?
 
Hello:

a. Regarding the typical Wood horizontal type of Clapboard siding:

Is it desireable to prime the backside of the planks ? Why ?

My thought being that it "might" be better to have it un-primed to allow
moisture to escape ,
but am not sure, hence the question.

b. The same question, for T1-11 wood panel type of siding.

If the answer to either is "yes" to either, is it actually available this
way ?
From which mfg(s), please ?

Thanks,
Bob



DanG August 6th 06 03:03 PM

Prime Backside Of Siding ?
 
Backpriming wood has always been the normal professional way of
working the material.

The purpose is to prevent moisture entering the wood. Moisture
will exit to the exterior and push off any paint or coating that
is there.

There are more manufacturers offering preprimed product than in
the past. Enter preprimed wood siding in Google.


______________________________
Keep the whole world singing . . . .
DanG (remove the sevens)




"Robert11" wrote in message
...
Hello:

a. Regarding the typical Wood horizontal type of Clapboard
siding:

Is it desireable to prime the backside of the planks ? Why ?

My thought being that it "might" be better to have it un-primed
to allow moisture to escape ,
but am not sure, hence the question.

b. The same question, for T1-11 wood panel type of siding.

If the answer to either is "yes" to either, is it actually
available this way ?
From which mfg(s), please ?

Thanks,
Bob




[email protected] August 6th 06 04:09 PM

Prime Backside Of Siding ?
 

Robert11 wrote:
Hello:

a. Regarding the typical Wood horizontal type of Clapboard siding:

Is it desireable to prime the backside of the planks ? Why ?

My thought being that it "might" be better to have it un-primed to allow
moisture to escape ,
but am not sure, hence the question.

b. The same question, for T1-11 wood panel type of siding.

If the answer to either is "yes" to either, is it actually available this
way ?
From which mfg(s), please ?

Thanks,
Bob


There are a couple of reasons to paint all surfaces of wood. The end
grain is particularly important since it sucks up water faster than
other surfaces.
TB



All times are GMT +1. The time now is 08:27 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter