Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Sprinkler problem with threaded PVC pipe
Hello all, Just found this group and thought I would ask this question here. I have a little problem. My water sprinkler head needs replacing and it would be a pretty simple matter IF the darn thing didn't snap off RIGHT at the thread point IN the pipe! Any ideas how to remove the 1/2 inch plastic thread end from a larger PVC pipe?.. I need to unscrew it but there is NOTHING to grab onto. The break is FLUSH with the 2nd pipe. I hate to have to cut and replace the whole section.. there must be some trick I could use. Thanks for any suggestions.. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How much water in a copper tube? | Home Repair | |||
Sprinkler Pipe Repair Question | Home Repair | |||
Ground Rod For House ? | Home Repair | |||
Inaccessible pipe leak problem. | Home Repair | |||
Copper pipe sizing. Is bigger better? | Home Repair |