Working on a model ACD2334HRS.

Side by side. Customer's original complaint about six months ago, not
cooling. I put a hard start kit on the compressor.

Not cooling again. This time, the two fans and the compressor were not
running. I took the control box open, and checked the cold control. It
has continuity or not, far left turns off the refrig.

Ordered and replaced the adaptive control board. Now, same thing. No
evaporator fan running. No condensor fan. No compressor.

Light is nice and bright, so it's not low voltage.

Now, what to do?

--

Christopher A. Young
You can't shout down a troll.
You have to starve them.
..

On Sat, 22 Jul 2006 02:55:46 GMT, "Stormin Mormon"
wrote:

Working on a model ACD2334HRS.

Side by side. Customer's original complaint about six months ago, not
cooling. I put a hard start kit on the compressor.

Not cooling again. This time, the two fans and the compressor were not
running. I took the control box open, and checked the cold control. It
has continuity or not, far left turns off the refrig.

Ordered and replaced the adaptive control board. Now, same thing. No
evaporator fan running. No condensor fan. No compressor.

Light is nice and bright, so it's not low voltage.

Now, what to do?

Call someone who knows what they are doing since you obviously don't.