Impulse Springkler problem
I have one of those impulse sprinklers that rotate back and forth clockwise
and clounter-clockwise The mechanism to make it go clockwise works fine But when the sprinklers reaches the stop to reverse it's direction counter-clockwise, the mechanism is stuck and the sprinkler stays at it's most clockwise position without reversing direction.. A gentle tap on the little arm that contols direction solves the problem But the sprinkler shoud be able to change direction without external "input" What are the steps for diagnosing and solving the problem ? Is there a troubleshooting FAQ or URL for such sprinklers ? TNX. |
Impulse Springkler problem
wrote in message ... I have one of those impulse sprinklers that rotate back and forth clockwise and clounter-clockwise The mechanism to make it go clockwise works fine But when the sprinklers reaches the stop to reverse it's direction counter-clockwise, the mechanism is stuck and the sprinkler stays at it's most clockwise position without reversing direction.. A gentle tap on the little arm that contols direction solves the problem But the sprinkler shoud be able to change direction without external "input" What are the steps for diagnosing and solving the problem ? Is there a troubleshooting FAQ or URL for such sprinklers ? Probably just increase the water pressure or replace the sprinkler. Bob |
Impulse Springkler problem
|
All times are GMT +1. The time now is 02:14 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter