mower deck spindle *bearings*, generally, and 'old grasshopper ZTRspindles' in particular - repurposing
 

hi guys

is it "standard industry practice" to use tapered roller bearings, top
and bottom, in 'most' mower deck spindles, generally? if so, are the
upper and lower bearings 'generally' the same size? or maybe they're
'angular contact' type? I'm seeking a 'general' answer here and do
realize 'it may vary'...

I have an ancient grasshopper ZTR mower I'm parting out, and (because of
shockingly high new bearing prices) I'd like to 'repurpose' one of the
(three) 44 inch mower deck spindles, =if= it contains tapered roller
bearings (or angular contacts). the mower is a model 1820, and the
spindle 'carrier' housings are cast iron (if that helps any). obviously,
I haven't dismantled a housing yet 'to look inside'...I want to use one
of those spindles to 'carry' a drill press countershaft pulley rig I'm
building, either 'in its entirety', or, possibly, just the upper and
lower bearings complete, less the housing.

the drill press countershaft rig 'in progress':
http://machines.awardspace.com/countershaft/

grasshopper spindle pics (bottom of images):
http://machines.50webs.com/Grasshopp...s/photo34.html
http://machines.50webs.com/Grasshopp...s/photo36.html

the old grasshopper, top of site:
http://machines.50webs.com/Grasshopper_ZTR/

thanks for educating me :-)

toolie

--
replies, if any, by e-mail should remove the 'weirdstuff' from my
address before you click 'send' - thanks :-)
--

mower deck spindle *bearings*, generally, and 'old grasshopper ZTR spindles' in particular - repurposing
 

I pass - but I'm curious to see what replies you get.

"dave" wrote in message
news:OkNug.103233$IZ2.87738@dukeread07...
hi guys

is it "standard industry practice" to use tapered roller bearings, top and
bottom, in 'most' mower deck spindles, generally? if so, are the upper and
lower bearings 'generally' the same size? or maybe they're 'angular
contact' type? I'm seeking a 'general' answer here and do realize 'it may
vary'...

I have an ancient grasshopper ZTR mower I'm parting out, and (because of
shockingly high new bearing prices) I'd like to 'repurpose' one of the
(three) 44 inch mower deck spindles, =if= it contains tapered roller
bearings (or angular contacts). the mower is a model 1820, and the spindle
'carrier' housings are cast iron (if that helps any). obviously, I haven't
dismantled a housing yet 'to look inside'...I want to use one of those
spindles to 'carry' a drill press countershaft pulley rig I'm building,
either 'in its entirety', or, possibly, just the upper and lower bearings
complete, less the housing.

the drill press countershaft rig 'in progress':
http://machines.awardspace.com/countershaft/

grasshopper spindle pics (bottom of images):
http://machines.50webs.com/Grasshopp...s/photo34.html
http://machines.50webs.com/Grasshopp...s/photo36.html

the old grasshopper, top of site:
http://machines.50webs.com/Grasshopper_ZTR/

thanks for educating me :-)

toolie

--
replies, if any, by e-mail should remove the 'weirdstuff' from my address
before you click 'send' - thanks :-)
--