DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Shingles / wind question (https://www.diybanter.com/home-repair/165689-shingles-wind-question.html)

Kurt Gavin June 14th 06 09:50 PM

Shingles / wind question
 
Came home early and saw that heavy winds head on to the edge of the roof
shingles were lifting them a few inches along one tier.

In a few other areas, the shingles were starting to lift a 1/2 inch or so.

I went up and used shingle glue and some weight plates to secure down the
worst tier. (The ladder blew down, buts that another story and I don't want
to get you laffing).

Anyway, when the winds calm, whats the best maintenance steps? Nailing
through the top shingle layer is a no-no, correct? BTW, we commonly get
substantial winds around here.

Thanks, KG







Travis Jordan June 14th 06 10:33 PM

Shingles / wind question
 
Kurt Gavin wrote:
Came home early and saw that heavy winds head on to the edge of the
roof shingles were lifting them a few inches along one tier.


Anyway, when the winds calm, whats the best maintenance steps? Nailing
through the top shingle layer is a no-no, correct? BTW, we commonly
get substantial winds around here.


If you are in a hurricane-prone area or are exposed to winds in excess
of 60 mph, you need to plan for a roof replacement with a material that
will withstand those winds. Shingles are not one of the options.
Consider either metal roofing or adhesive-attached tile.



[email protected] June 14th 06 10:37 PM

Shingles / wind question
 

Kurt Gavin wrote:
Came home early and saw that heavy winds head on to the edge of the roof
shingles were lifting them a few inches along one tier.

In a few other areas, the shingles were starting to lift a 1/2 inch or so.

I went up and used shingle glue and some weight plates to secure down the
worst tier. (The ladder blew down, buts that another story and I don't want
to get you laffing).

Anyway, when the winds calm, whats the best maintenance steps? Nailing
through the top shingle layer is a no-no, correct? BTW, we commonly get
substantial winds around here.

Thanks, KG


The wind gets so strong where I am it's enough to blow the head off of
you. We gum down each shingle as they are installed. Forget that silly
little line of gum under the celophane strip. I'd carry on and gum down
what you have started and do a yearly inspection of your entire roof -
either with binoculars from ground level or up on the roof. BTW I have
had ladders go over in the past and it's not fun when your're up 3
stories. I installed 2 sets of good eye hooks on each side of my house
into the facia . stud. I always hook the ladder on to these whenever I
am up there.


Kurt Gavin June 14th 06 11:36 PM

Shingles / wind question
 

"Travis Jordan" wrote in message
. ..
Kurt Gavin wrote:
Came home early and saw that heavy winds head on to the edge of the
roof shingles were lifting them a few inches along one tier.


Anyway, when the winds calm, whats the best maintenance steps? Nailing
through the top shingle layer is a no-no, correct? BTW, we commonly
get substantial winds around here.


If you are in a hurricane-prone area or are exposed to winds in excess
of 60 mph, you need to plan for a roof replacement with a material that
will withstand those winds. Shingles are not one of the options.
Consider either metal roofing or adhesive-attached tile.


Our usual max is 50 mph, but we get a lot of windy days.



[email protected] June 15th 06 12:11 AM

Shingles / wind question
 
Please post the part about the ladder falling. I need a laugh.

To fix, get roofing cement in a caulking tube. Put a gob or two under
each loose tab and push it down. Do this when it's warm and not
windy. Of course replace all missing or torn tabs too.


On Wed, 14 Jun 2006 20:50:27 GMT, "Kurt Gavin"
wrote:

Came home early and saw that heavy winds head on to the edge of the roof
shingles were lifting them a few inches along one tier.

In a few other areas, the shingles were starting to lift a 1/2 inch or so.

I went up and used shingle glue and some weight plates to secure down the
worst tier. (The ladder blew down, buts that another story and I don't want
to get you laffing).

Anyway, when the winds calm, whats the best maintenance steps? Nailing
through the top shingle layer is a no-no, correct? BTW, we commonly get
substantial winds around here.

Thanks, KG







DK June 15th 06 12:33 AM

Shingles / wind question
 

I agree.

But it helps if you do a neat job of the patching, because after a
couple of years, the shingle will try to buckle around the patches.

Thus, for best long term results, you need to follow the line of the
original patch.



On Wed, 14 Jun 2006 18:11:20 -0500, wrote:

Please post the part about the ladder falling. I need a laugh.

To fix, get roofing cement in a caulking tube. Put a gob or two under
each loose tab and push it down. Do this when it's warm and not
windy. Of course replace all missing or torn tabs too.


On Wed, 14 Jun 2006 20:50:27 GMT, "Kurt Gavin"
wrote:

Came home early and saw that heavy winds head on to the edge of the roof
shingles were lifting them a few inches along one tier.

In a few other areas, the shingles were starting to lift a 1/2 inch or so.

I went up and used shingle glue and some weight plates to secure down the
worst tier. (The ladder blew down, buts that another story and I don't want
to get you laffing).

Anyway, when the winds calm, whats the best maintenance steps? Nailing
through the top shingle layer is a no-no, correct? BTW, we commonly get
substantial winds around here.

Thanks, KG








All times are GMT +1. The time now is 09:28 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter