Dehumidifier Buildup not melting?
 

My dehumidifier keeps frosting/icing up (very, very thick buildup) on the
coils and not melting and going into water pan. I currently wait until there
is quite a build up then turn if off, the buildup melts, then I turn the
unit back on again and repeat.
Why is the build up not melting, I thought the room may not be warm enough
to allow melting. The room is of normal temp about 72 degrees F. Could the
cooling fan be moving the warm air away from the coils, so that the buildup
cannot melt.
This is only my logic, I am assuming this is part of the theory of how a
dehumidifier is suppost to work.
Could there be something mechinical wrong with the unit?
Why is it building up ice and not melting??

Dehumidifier Buildup not melting?
 

On Wed, 10 May 2006 15:32:08 GMT, "Lorrie" wrote:

My dehumidifier keeps frosting/icing up (very, very thick buildup) on the
coils and not melting and going into water pan. I currently wait until there
is quite a build up then turn if off, the buildup melts, then I turn the
unit back on again and repeat.
Why is the build up not melting, I thought the room may not be warm enough
to allow melting. The room is of normal temp about 72 degrees F. Could the
cooling fan be moving the warm air away from the coils, so that the buildup
cannot melt.
This is only my logic, I am assuming this is part of the theory of how a
dehumidifier is suppost to work.
Could there be something mechinical wrong with the unit?
Why is it building up ice and not melting??


Is it cold in the space the dehumidifier is in? it could be too cold
or low on refrigerant charge. it could also be a bad fan motor.
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++
spam protection measure, Please remove the 33 to send e-mail

Dehumidifier Buildup not melting?
 

If the huidity is very high, it will run continuously, leaving no rest
period for any ice to melt. I suggest the dehumidifier is too small for the
room you are using it in or is set too high.

Mechanically speaking, reduced airflow due to dust/dirt build up in the
coils or a bad fan would cause similar problems. I don't think most
dehumidifiers have a defrost function like fridges do but some may.



"hvactech2" wrote in message
...
On Wed, 10 May 2006 15:32:08 GMT, "Lorrie" wrote:

My dehumidifier keeps frosting/icing up (very, very thick buildup) on the
coils and not melting and going into water pan. I currently wait until
there
is quite a build up then turn if off, the buildup melts, then I turn the
unit back on again and repeat.
Why is the build up not melting, I thought the room may not be warm enough
to allow melting. The room is of normal temp about 72 degrees F. Could the
cooling fan be moving the warm air away from the coils, so that the
buildup
cannot melt.
This is only my logic, I am assuming this is part of the theory of how a
dehumidifier is suppost to work.
Could there be something mechinical wrong with the unit?
Why is it building up ice and not melting??


Is it cold in the space the dehumidifier is in? it could be too cold
or low on refrigerant charge. it could also be a bad fan motor.
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++
spam protection measure, Please remove the 33 to send e-mail

Dehumidifier Buildup not melting?
 

"Lorrie" wrote in message news:YHn8g.5211$zn1.4134@clgrps13...
My dehumidifier keeps frosting/icing up (very, very thick buildup) on the
coils and not melting and going into water pan. I currently wait until there
is quite a build up then turn if off, the buildup melts, then I turn the
unit back on again and repeat.
Why is the build up not melting, I thought the room may not be warm enough
to allow melting. The room is of normal temp about 72 degrees F. Could the
cooling fan be moving the warm air away from the coils, so that the buildup
cannot melt.
This is only my logic, I am assuming this is part of the theory of how a
dehumidifier is suppost to work.
Could there be something mechinical wrong with the unit?
Why is it building up ice and not melting??

I have heard that low refrigerant charge can cause this. You could put it on a timer.
There is one available that allows you to turn something on or off every half hour or hour.
Set it to turn off 1/2 hour or hour every few hours.

Bob

Dehumidifier Buildup not melting?
 

Some models of dehum have a set point thermostat tht clamps to the
freon tube. If it gets too cold, it shuts off the compressor.

AC guys call that a "freeze stat", and they are a very good idea.

--

Christopher A. Young
You can't shout down a troll.
You have to starve them.
..

"Bob" wrote in message
. ..

"Lorrie" wrote in message
news:YHn8g.5211$zn1.4134@clgrps13...
My dehumidifier keeps frosting/icing up (very, very thick buildup)
on the
coils and not melting and going into water pan. I currently wait
until there
is quite a build up then turn if off, the buildup melts, then I turn
the
unit back on again and repeat.
Why is the build up not melting, I thought the room may not be warm
enough
to allow melting. The room is of normal temp about 72 degrees F.
Could the
cooling fan be moving the warm air away from the coils, so that the
buildup
cannot melt.
This is only my logic, I am assuming this is part of the theory of
how a
dehumidifier is suppost to work.
Could there be something mechinical wrong with the unit?
Why is it building up ice and not melting??

I have heard that low refrigerant charge can cause this. You could put
it on a timer.
There is one available that allows you to turn something on or off
every half hour or hour.
Set it to turn off 1/2 hour or hour every few hours.

Bob