Dryer drum stopped rotating
 

I've got a Kenmore 80 Series electric clothes dryer, whose drum stopped
turning last night. The heat comes on, and it sounds like the motor is
running, but there's no tumbling. I could probably switch out a simple
part or two, if that's what wrong, but I don't know what to look for
once I get the back off. Any direction would be most appreciated.

--
bruce
The dignified don't even enter in the game.
-- The Jam

Dryer drum stopped rotating
 

probably a broken belt, most likely you will need to remove drum, but
its no biggie.

the belt circles the drum.

on all the newer dryers you will need to remove the front, since the
back supports the drum its not removable.

Dryer drum stopped rotating
 

"Tony Hwang" wrote in message
news:FEc7g.134280$P01.65733@pd7tw3no...
wrote:
I've got a Kenmore 80 Series electric clothes dryer, whose drum stopped
turning last night. The heat comes on, and it sounds like the motor is
running, but there's no tumbling. I could probably switch out a simple
part or two, if that's what wrong, but I don't know what to look for
once I get the back off. Any direction would be most appreciated.

--
bruce
The dignified don't even enter in the game.
-- The Jam

Hi,
Door interlock switch not closing or belt is off the pulley.

Or belt is 419.

Steve

Dryer drum stopped rotating
 

Thanks, all; it's a snapped belt. I got a couple of DIY books from the
library, and have got the machine apart. Tomorrow, I'll find a new
belt & see about getting the rascal back together.

Dryer drum stopped rotating
 

wrote:
Thanks, all; it's a snapped belt. I got a couple of DIY books from the
library, and have got the machine apart. Tomorrow, I'll find a new
belt & see about getting the rascal back together.

There's a kit you can buy that includes a belt, wheels that support the
rear of the drum and a tensioner belt pully for about 35.00.
While you're at it you might want to take off the rear panel and then
the cover to access the blower fan and make sure the fan is clear of
debris. Mine jammed up and I thought it was the motor gone bad.