DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   3 way dimmer switch (https://www.diybanter.com/home-repair/149531-3-way-dimmer-switch.html)

cj March 17th 06 11:33 AM

3 way dimmer switch
 
greetings, i would like to use 2 3 way dimmer switches for some recessed
lighting. can it be done or must i use a 3 way toggle switch and one 3
way dimmer?
thanks cj


RBM March 17th 06 12:03 PM

3 way dimmer switch
 
You can either use a combination of one three way switch and one three way
dimmer or you can get three way master-slave dimmers like Lutron "Diva"




"cj" wrote in message
...
greetings, i would like to use 2 3 way dimmer switches for some recessed
lighting. can it be done or must i use a 3 way toggle switch and one 3 way
dimmer?
thanks cj




RBM March 17th 06 12:06 PM

3 way dimmer switch
 
Sorry, Lutron "Maestro" not "Diva"





"RBM" rbm2(remove wrote in message
...
You can either use a combination of one three way switch and one three way
dimmer or you can get three way master-slave dimmers like Lutron "Diva"




"cj" wrote in message
...
greetings, i would like to use 2 3 way dimmer switches for some recessed
lighting. can it be done or must i use a 3 way toggle switch and one 3
way dimmer?
thanks cj






cj March 17th 06 12:27 PM

3 way dimmer switch
 
i guess i'll just use a 3 way toggle and a 3 way dimmer. now i'm a bit
confused about wiring it up. the feed will come in at the toggle but
after that i'm not quite sure how it will go. i have the lights wired up
and the line dropped down from the ceiling to where the toggle will be
located. the feed also comes up from the basement to where the toggle 3
way is. i'm not sure about the travellers to the three way dimmer. any
advice
thanks cj

RBM wrote:

You can either use a combination of one three way switch and one three way
dimmer or you can get three way master-slave dimmers like Lutron "Diva"




"cj" wrote in message
...

greetings, i would like to use 2 3 way dimmer switches for some recessed
lighting. can it be done or must i use a 3 way toggle switch and one 3 way
dimmer?
thanks cj






Kevin Ricks March 17th 06 02:53 PM

3 way dimmer switch
 


"cj" wrote in message
...
i guess i'll just use a 3 way toggle and a 3 way dimmer. now i'm a bit
confused about wiring it up. the feed will come in at the toggle but after
that i'm not quite sure how it will go. i have the lights wired up and the
line dropped down from the ceiling to where the toggle will be located. the
feed also comes up from the basement to where the toggle 3 way is. i'm not
sure about the travellers to the three way dimmer. any advice
thanks cj


Wiring the 3 way is the same using one 3 way dimmer or not.
I can't follow what you have said above so I am not quite sure about what
you have done so far.

Here are 3 methods that you could use. The 1st is the easiest to do and to
understand.
1. Hot feed goes to one switch box. 3 wire cable from switch box to switch
switch box. Then 2 wire cable from the other switch to the light(s)
2. Hot feed goes to 1st switch box. 2 wire cable from SAME box up to
light(s). 3 wire cable from 1st box to 2nd box.
3. Hot feed at light box. 3 wire cables from each box both going up to the
light box.

You need to choose which way best fits your situation.
Get a basic wiring book or Google for 3 way circuits and you will find many
examples- diagrams etc on how to make the connections.

Kevin






RBM wrote:

You can either use a combination of one three way switch and one three
way dimmer or you can get three way master-slave dimmers like Lutron
"Diva"




"cj" wrote in message
...

greetings, i would like to use 2 3 way dimmer switches for some recessed
lighting. can it be done or must i use a 3 way toggle switch and one 3
way dimmer?
thanks cj








cj March 17th 06 03:03 PM

3 way dimmer switch
 
thanks kevin
cj

Kevin Ricks wrote:

"cj" wrote in message
...

i guess i'll just use a 3 way toggle and a 3 way dimmer. now i'm a bit
confused about wiring it up. the feed will come in at the toggle but after
that i'm not quite sure how it will go. i have the lights wired up and the
line dropped down from the ceiling to where the toggle will be located. the
feed also comes up from the basement to where the toggle 3 way is. i'm not
sure about the travellers to the three way dimmer. any advice
thanks cj



Wiring the 3 way is the same using one 3 way dimmer or not.
I can't follow what you have said above so I am not quite sure about what
you have done so far.

Here are 3 methods that you could use. The 1st is the easiest to do and to
understand.
1. Hot feed goes to one switch box. 3 wire cable from switch box to switch
switch box. Then 2 wire cable from the other switch to the light(s)
2. Hot feed goes to 1st switch box. 2 wire cable from SAME box up to
light(s). 3 wire cable from 1st box to 2nd box.
3. Hot feed at light box. 3 wire cables from each box both going up to the
light box.

You need to choose which way best fits your situation.
Get a basic wiring book or Google for 3 way circuits and you will find many
examples- diagrams etc on how to make the connections.

Kevin







RBM wrote:


You can either use a combination of one three way switch and one three
way dimmer or you can get three way master-slave dimmers like Lutron
"Diva"




"cj" wrote in message
...


greetings, i would like to use 2 3 way dimmer switches for some recessed
lighting. can it be done or must i use a 3 way toggle switch and one 3
way dimmer?
thanks cj









All times are GMT +1. The time now is 10:27 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter