Skil router problem
 

I have a brand new Skil router Model 1810. It has a lever to lock the base
to the motor after setting the cut depth. With the Base locked to the
motor, I can "rock" the motor within the base enough to move the bit 1/8
inch. Needless to say, this makes a very sloppy cut! I have e-mailed Skil
but they have not yet replied. Anyone have suggestions.

Skil router problem
 

In article , Alfred Loizeaux wrote:
I have a brand new Skil router Model 1810. It has a lever to lock the base
to the motor after setting the cut depth. With the Base locked to the
motor, I can "rock" the motor within the base enough to move the bit 1/8
inch. Needless to say, this makes a very sloppy cut! I have e-mailed Skil
but they have not yet replied. Anyone have suggestions.

The only suggestion that's worthwhile is one you probably don't want to hear:
buy a better router. Bosch, Makita, Porter-Cable, DeWalt... but not Skil. It's
crap (as you've discovered).

--
Regards,
Doug Miller (alphageek at milmac dot com)

It's time to throw all their damned tea in the harbor again.

Skil router problem
 

Alfred Loizeaux wrote:
I have a brand new Skil router Model 1810. It has a lever to lock the base
to the motor after setting the cut depth. With the Base locked to the
motor, I can "rock" the motor within the base enough to move the bit 1/8
inch. Needless to say, this makes a very sloppy cut! I have e-mailed Skil
but they have not yet replied. Anyone have suggestions.
Hi,
Skil is an El Cheapo brand. I have Porter & Cable. Solid stuff.
Tony

Skil router problem
 

I have a Dewalt 618 - around $100 reconditioned from Amazon. No
movement whatsoever when it's locked down. I also recently saw a
Dewalt 616 go for about $50 on eBay - same router without variable
speed.
I've also heard good things about Porter Cable and Bosch routers.
Hate to say it, but that's your suggestion.
Andy

Skil router problem
 

Yes, those low prices on Skil, Black & Decker, Craftsman etc, are sooo
tempting, but use them once and you'll discover why you should've just
spent a little more to get something that's actually made to do the
job. Sorry, but all the above posts are correct in addressing your
problem.

Skil router problem
 

I had same problem with fixed base of the Skil 1825 (I think that was
the model number ... 2.25 hp, interchangeable bases). I ended up
selling it (took a little loss, but not much, even after fully
disclosing to the buyer my complaint about the thing) and buying a
Bosch. My wife was not happy.

Skil router problem
 

Alfred Loizeaux wrote:
I have a brand new Skil router Model 1810. It has a lever to lock the base
to the motor after setting the cut depth. With the Base locked to the
motor, I can "rock" the motor within the base enough to move the bit 1/8
inch. Needless to say, this makes a very sloppy cut! I have e-mailed Skil
but they have not yet replied. Anyone have suggestions?

Yep. eBay. Hope you kept the box and papers. There's a reason that
you can buy that Skil for $60.

You need to buy a better unit, and yes it will cost a bit more. It's
an extremely useful tool and will last a long time. Viewed another
way, you'' probably spend more on good bits than you will on the
router. So spring for a good one. Porter Cable invented the router
and they don't make ****ty ones. DeWalt is also good, as is Bosch.

R

Skil router problem
 

On 16 Dec 2005 06:29:06 -0800, "siralfred" wrote:

Yes, those low prices on Skil, Black & Decker, Craftsman etc, are sooo
tempting, but use them once and you'll discover why you should've just
spent a little more to get something that's actually made to do the
job. Sorry, but all the above posts are correct in addressing your
problem.
=================
As an OLD and experienced woodworker I have to agree .

I currently have seven routers in my shop 2 for hand held use and 5
mounted in tables (regular horizontal, and overhead) BUT most are the
very inexpensive DeWalt 610's .. the hand helds are Bosch & Porter
Cable .... the 610's are about the least expensive light duty router
I would even glance at...all of mine have worked just fine (for what I
use them for) ...

Not Ragging on "Skil"...but I think you now understand cheap tools

Bob G.

Skil router problem
 

"Jim in PA" wrote in message

and buying a
Bosch. My wife was not happy.

Have your wife do the routing with the cheapo and she will change her tune a
bit.

My wife does not care what tools I buy as long as I'm happy.
--
Ed
http://pages.cthome.net/edhome/

Skil router problem
 

Edwin Pawlowski wrote:

"Jim in PA" wrote in message


and buying a
Bosch. My wife was not happy.


Have your wife do the routing with the cheapo and she will change her tune a
bit.

My wife does not care what tools I buy as long as I'm happy.
Hi,
Poor tools are time waster and some times it even causes injury.
I always get best and keep it for life time. If I can't get what I want,
I save up until I can. No junks in this house.
Tony

Skil router problem
 

On Fri, 16 Dec 2005 00:00:41 GMT, Alfred Loizeaux
wrote:

I have a brand new Skil router Model 1810. It has a lever to lock the base
to the motor after setting the cut depth. With the Base locked to the
motor, I can "rock" the motor within the base enough to move the bit 1/8
inch. Needless to say, this makes a very sloppy cut! I have e-mailed Skil
but they have not yet replied. Anyone have suggestions.

Call them. They will NEVER reply to email, at least nothing more than
a canned reply telling you to call them. There's probably an 800
number on their website, Be warned, they will probably tell you to
call your local service center, and who knows where that will go.
Prepare for the runaround of your life. I think they do that just so
the person gets so tired of the hassle they give up and buy a new
tool.

If it's still within the store limits for returns, return it and get a
refund. Then take that money and double it, and buy a decent brand.
Skil makes the worst power tools sold. Even those generic tools using
the brand name "Tool Shop" are better than Skil. I'd go with
Milwaukee tools, or DeWalt. If you dont want to spend more money, at
least get a Black & Decker, they used to make good tools, but they're
pretty poor quality these days, but still better than Skil.

Skil router problem
 

On 15 Dec 2005 21:33:14 -0800, wrote:

I have a Dewalt 618 - around $100 reconditioned from Amazon. No
movement whatsoever when it's locked down. I also recently saw a
Dewalt 616 go for about $50 on eBay - same router without variable
speed.
I've also heard good things about Porter Cable and Bosch routers.
Hate to say it, but that's your suggestion.
Andy

I would hesitate to buy power tools (or anything electrical) from
Ebay. I bought a reciprocating saw on there and the entire saw was
literally broken in half. The seller claimed it must have occurred in
shipping. I said the box was intact, the plastic case and the STEEL
HOUSING inside were broken apart. After a big arguement, the guy said
he did notice the screws were loose on the case but he never used the
saw. Yet he had it listed as "in perfect working condition". He
finally agreed to take it back but only refund the sale price, not the
shipping. That meant that it would cost me MORE than I paid for it by
the time I ship it back. Fortunately for me, I bought this saw as a
replacement for the identical saw which I had for years, but I burned
the motor out when cutting down a tree with it. I told the guy I'll
settle for half the cost refunded, if I can keep it, and said I'd send
him a photo of the damage. He finally agreed. I was able to swap the
motors and make a working saw again.

And then there's the computer I bought on Ebay which literally went up
in smoke when I plugged it in. Something in the power supply burnt to
a crisp. Once again, the return shipping would have cost a bundle. I
ended up eating the loss and replaceing the power supply from another
dead computer.

I've come to the conclusion that any electrical stuff sold on Ebay is
someone elses defective junk. You are only buying parts !!!

I will never buy anything electrical from Ebay again.

Skil router problem
 

Alfred Loizeaux wrote:

I have a brand new Skil router Model 1810. It has a lever to lock the
base
to the motor after setting the cut depth. With the Base locked to the
motor, I can "rock" the motor within the base enough to move the bit 1/8
inch. Needless to say, this makes a very sloppy cut! I have e-mailed
Skil
but they have not yet replied. Anyone have suggestions.

you buy crap you get crap!

--
"you can lead them to LINUX
but you can't make them THINK"

Skil router problem
 

On 16 Dec 2005 08:50:15 -0800, "Jim in PA"
wrote:

I had same problem with fixed base of the Skil 1825 (I think that was
the model number ... 2.25 hp, interchangeable bases). I ended up
selling it (took a little loss, but not much, even after fully
disclosing to the buyer my complaint about the thing) and buying a
Bosch. My wife was not happy.

Thats easy to fix. Sell your wife the same way you sold the router.
Take a little loss on her, fully disclose to any guys she dates all of
your complaints, and get yourself a better brand wife. She'll cost
more, but remember, its' the quality, not the price you pay.

Skil router problem
 

On Fri, 16 Dec 2005 22:09:50 GMT, "Edwin Pawlowski"
wrote:


"Jim in PA" wrote in message

and buying a
Bosch. My wife was not happy.

Have your wife do the routing with the cheapo and she will change her tune a
bit.

My wife does not care what tools I buy as long as I'm happy.

Then YOUR tool must satisfy her !!!! :)

Skil router problem
 

Skil router problem
 

A mistake I made was buying a Skil belt sander. Tool repair shop
waited 6 MONTHS for replacement switch! Figured they'd get it before
me.

On Fri, 16 Dec 2005 12:53:42 -0500, Bob G.
wrote:


Not Ragging on "Skil"...but I think you now understand cheap tools