register question
 

one or more of my registers are unable to be screwed in. why you ask? b/c
there is no drywall or metal to go through. what can i do about this?

register question
 

SeaKan wrote:
one or more of my registers are unable to be screwed in. why you ask? b/c
there is no drywall or metal to go through. what can i do about this?



Crimp the duct with pliers enough so they are a snuger fit and/or
slather some silicone caulk on them before you push them in.

Howzatt?

Jeff

--
Jeffry Wisnia

(W1BSV + Brass Rat '57 EE)

"Truth exists; only falsehood has to be invented."

register question
 

On Sat, 10 Dec 2005 14:16:28 -0500, "SeaKan"
wrote:

one or more of my registers are unable to be screwed in. why you ask? b/c
there is no drywall or metal to go through. what can i do about this?


Construction Adhesive caulk.
Make sure you put it in your ears. Hopefully if will piece your broken
brain back together.
Bubba

register question
 

SeaKan wrote:
one or more of my registers are unable to be screwed in. why you ask? b/c
there is no drywall or metal to go through. what can i do about this?

Bend up some metal angle clips from scrap metal (old ductwork would be
good) and Tek screw them to the sides of the duct. Sheetmetal screws
hold the register to the clips.

R

register question
 

"Bubba" ReMoVe wrote in message
...
On Sat, 10 Dec 2005 14:16:28 -0500, "SeaKan"
wrote:

one or more of my registers are unable to be screwed in. why you ask?
b/c
there is no drywall or metal to go through. what can i do about this?


Construction Adhesive caulk.
Make sure you put it in your ears. Hopefully if will piece your broken
brain back together.
Bubba

or i could squirt it up your wife's ****. that would work too.