Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Garage Door Closing Problem
Installed abou 8 years ago. Was told only to use WD 40 on the rails
etc. not the heavier "aluminum "grease. Now when it goes thru its closing cycle it starts to surge in fits and starts, back and forth, one side then the other, with increasing noise as it does so. As well when it stops there is often a small 1/2 inch gap left at the bottom that a push with my foot resolves. Is this a lubrication, alignment, cable or perhaps other problem anybody have any suggestions info, thanks Doc |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Freezer Problem in the Garage | Home Repair | |||
Two questions about security light above the garage door | Home Ownership | |||
Two questions about security light above the garage door | Home Repair | |||
Garage Door Opener Problem | Home Ownership | |||
Problem with Sears 1/2 HP garage door opener going down | Home Repair |