Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Busted my carport support beam.
I did a dumb thing. I backed my car into one of the vertical beams
that supports the roof of my carport. It broke off level with the ground and level with the bumper of my car. The 4x4 beam was set about a foot into the ground and extended from that point to the roof. The new beam wants to set in that same, foot deep hole but it won't go. The beam needs to be perfectly vertical in order for the beam - hole angle to be correct for insertion. I cannot get the beam perfectly level because the top of it hits the roof before it gets to proper position. Any ideas? Thanks, |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Replacing Roof Support Beam with 1x boards? | Home Repair | |||
OT - For Kathy | Metalworking | |||
Main beam support question | Home Repair | |||
Beam to support floor?? | Home Repair | |||
Carport pipe support rusted out | Home Repair |