Replacing a 36" door with a Stanley Door - Can this be done?
 

Hi all,

I have a steel Benchmark Door that I just installed. I thought it was a
nice door. However, painting it blows. I used Behr Exterior Latex paint
on it and it just peels like a *******. The door is defective and the
primer used on this door doesn't take in the paint. I painted a Stanley
door with the same paint and it's just awsome. Here's my question.
Would I be able to get only a Stanley Steel 36" door and hang it on the
existing hinges from the Benchmark Door? Will they line up?

John

wrote in message
oups.com...

Hi all,

I have a steel Benchmark Door that I just installed. I thought it was a
nice door. However, painting it blows. I used Behr Exterior Latex paint
on it and it just peels like a *******. The door is defective and the
primer used on this door doesn't take in the paint. I painted a Stanley
door with the same paint and it's just awsome. Here's my question.
Would I be able to get only a Stanley Steel 36" door and hang it on the
existing hinges from the Benchmark Door? Will they line up?

John


Changing a door every few years just because paint is peeling could get
expensive .
But we all have our own ways of doing things.

Perhaps just sanding down the present door might be cheaper ?

AMUN

I have a steel Benchmark Door that I just installed. I thought it was a
nice door. However, painting it blows. I used Behr Exterior Latex paint
on it and it just peels like a *******. The door is defective and the
primer used on this door doesn't take in the paint. I painted a Stanley
door with the same paint and it's just awsome. Here's my question.
Would I be able to get only a Stanley Steel 36" door and hang it on the
existing hinges from the Benchmark Door? Will they line up?
John
Sounds like you didnt properly prep the door first. Steel doors should be
cleaned with solvent or a detergent, dried completely, then lightly sanded
all over, and wiped dust free.. Then a coat of exterior primer, such as
bullseye or Kilz rated for exterior. Once that is done, an exterior enamel,
of whatever texture or gloss you choose, should be applied. I would use
alkyd over acrylic/latex based, on metal. Regular exterior house paint does
best on porous surfaces, such as wood, or over extremly well- prepped
primered surface..

wrote in message
oups.com...

Hi all,

I have a steel Benchmark Door that I just installed. I thought it was a
nice door. However, painting it blows. I used Behr Exterior Latex paint
on it and it just peels like a *******. The door is defective and the
primer used on this door doesn't take in the paint. I painted a Stanley
door with the same paint and it's just awsome. Here's my question.
Would I be able to get only a Stanley Steel 36" door and hang it on the
existing hinges from the Benchmark Door? Will they line up?

John


Your poor preparation is the door's fault?
Strip off the paint you applied, sand, clean with paint thinner, then use
the proper paint, something for metal.
Greg