Kenmore Clothes Washer revisited...
Looked as if the pump was leaking...replaced the pump..reassembled the
washer...now another problem..... When it calls for cold water nothing enters the tub...no water. The hot water works fine...just not the cold...any ideas? |
Jason wrote: Looked as if the pump was leaking...replaced the pump..reassembled the washer...now another problem..... When it calls for cold water nothing enters the tub...no water. The hot water works fine...just not the cold...any ideas? Hi, Cold water tap turned off, wire got bumped off of the fill valve during the repair, bad fill valve, fill hose was kinked pushing the washer back into place, temp selector switch is between settings.... http://www.applianceaid.com/generalwash.html#fill jeff. Appliance Repair Aid http://www.applianceaid.com/ |
Appliance Repair Aid wrote:
Jason wrote: Looked as if the pump was leaking...replaced the pump..reassembled the washer...now another problem..... When it calls for cold water nothing enters the tub...no water. The hot water works fine...just not the cold...any ideas? Hi, Cold water tap turned off, wire got bumped off of the fill valve during the repair, bad fill valve, fill hose was kinked pushing the washer back into place, temp selector switch is between settings.... http://www.applianceaid.com/generalwash.html#fill And could one of those problems have caused the pump to run dry and be damaged? |
All times are GMT +1. The time now is 12:12 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter