How Big is a Baby's Head
 

We are having our old deck replaced. What should I expect as a "normal" spacing
for the balusters on the railing?

____________________
Bill Waller
New Eagle, PA

"Bill Waller" wrote in message
...
We are having our old deck replaced. What should I expect as a "normal"
spacing
for the balusters on the railing?

____________________

A test used by local inspectors on pool fence is a 5" diameter ball. Might
be a little bigger on stairs, as 5" seems like it might be a little crowded.

Check codes in your area. What they do here don't mean nothing where you
live.

Steve

In article , Bill Waller
wrote:

We are having our old deck replaced. What should I expect as a "normal"
spacing
for the balusters on the railing?

Standard for cribs is a 2 3/8 inch space between rails.

http://www.coscojuvenile.com/safety_notices-1.asp?recallid=44

djb

--
~ Stay Calm... Be Brave... Wait for the Signs ~
------------------------------------------------------
One site: http://www.balderstone.ca
The other site, with ww linkshttp://www.woodenwabbits.com

4" clear is International Residential Code.
I'd consider vinyl clad wire fabric as a temporary fix for very young
folks.
TB

4" clear is International Residential Code.
I'd consider vinyl clad wire fabric as a temporary fix for very young
folks.
TB

I remember from some where to take a soda pop can. If the can fits between
the rails, they are too far apart. Can't give you a cite, or URL. Just an
old memory.

How about a google search for crib safety?

http://www.drspock.com/article/0,1510,5226,00.html

Crib slats, posts, and cutouts. The vertical bars, or slats, that run along
the sides and sometimes the head and foot of a crib should be separated by
no more than 2-3/8 inches. While all new cribs are built to meet this safety
standard, the distance between slats on older cribs should be carefully
measured. You also should make sure that there are not cutouts on the boards
at the head and foot of the crib that your child could get his head or limbs
stuck in. And avoid cribs with posts-if they're longer than 1/16th of an
inch, they can pose a strangulation risk if your child were to get his
clothing looped around one. Finally, you might consider buying a crib that
sits close to the floor; the height of a typical crib is purely for parental
comfort and provides yet another place from which a child can fall.


--

Christopher A. Young
Learn more about Jesus
www.lds.org
www.mormons.com


"Bill Waller" wrote in message
...
We are having our old deck replaced. What should I expect as a "normal"
spacing
for the balusters on the railing?

____________________
Bill Waller
New Eagle, PA

Ask Monica Lewinsky about Baby's Head?

--

Christopher A. Young
Learn more about Jesus
www.lds.org
www.mormons.com

If it's going to be a Rush Limbaugh sized head, 36" spacing should do the
trick.

"Bill Waller" wrote in message
...
We are having our old deck replaced. What should I expect as a "normal"
spacing
for the balusters on the railing?

A quick call to the building inspector will tell you. Worth doing right
because it can be an issue if you sell the house ten years from now.

On Wed, 13 Jul 2005 19:43:45 -0400, Bill Waller
wrote:

We are having our old deck replaced. What should I expect as a "normal" spacing
for the balusters on the railing?



Darn good question. If a person, babies included, can put the skull
through between the railings it is not too difficult to squeeze the
rest of a normal sized body through. Done it lots of times as a
school kid.

PaPaPeng, 7/13/2005, 10:59:57 PM, wrote:

On Wed, 13 Jul 2005 19:43:45 -0400, Bill Waller
wrote:

We are having our old deck replaced. What should I expect as a
"normal" spacing for the balusters on the railing?



Darn good question. If a person, babies included, can put the skull
through between the railings it is not too difficult to squeeze the
rest of a normal sized body through. Done it lots of times as a
school kid.

I built my deck with the railing slats at 4.5 inches.

--
No matter what happens someone will find a way to take it too seriously.

"Bill Waller" wrote in message
...
We are having our old deck replaced. What should I expect as a "normal"
spacing
for the balusters on the railing?

In the middle of this myself. National Building Code requires that a 4"
sphere cannot pass between any point of the railings (including underneath
any shoe rail), and that a 6" sphere cannot pass through the triangles
caused by a shoe rail on the angled stairs.

Local codes may vary, but most follow the NBC. This should be covered in
your plan review when you pull the permit as well...

-Tim

"Tim Fischer" wrote in message
...
In the middle of this myself. National Building Code requires that a 4"


Gack, I shouldn't do this from memory. I meant the International
Residential Code (IRC)

-Tim

PaPaPeng wrote in
:

On Wed, 13 Jul 2005 19:43:45 -0400, Bill Waller
wrote:

We are having our old deck replaced. What should I expect as a
"normal" spacing for the balusters on the railing?



Darn good question. If a person, babies included, can put the skull
through between the railings it is not too difficult to squeeze the
rest of a normal sized body through. Done it lots of times as a
school kid.


I've heard you don't want more than a 4 inch gap between
spindles. The deck I added on a previous house passed inspection
OK with that.

"Tim Fischer" writes:
I meant the International Residential Code (IRC)

IYRC the irc? ;)

--
be safe.
flip
Ich habe keine Ahnung was das bedeutet, oder vielleicht doch?
Remove origin of the word spam from address to reply (leave "+")

On Wed, 13 Jul 2005 19:43:45 -0400, Bill Waller wrote:

We are having our old deck replaced. What should I expect as a "normal" spacing
for the balusters on the railing?

Thanks for the input. I have given the carpenter the 4" spacing. The balusters
(350 of them) have been ordered and better arrive tomorrow.

____________________
Bill Waller
New Eagle, PA

I dunno, but did you know that most people don't realize that large
pieces of coral, attached to the skull by common wood screws, can make a
child look like a deer.

I just built a rail with Dekorators balusters. The township wanted no more
that 4" opening. I installed them 4" on center. This made the spacing 3 1/4"
.. It looked very nice. See http://www.deckorators.com/
"Bill Waller" wrote in message
...
We are having our old deck replaced. What should I expect as a "normal"
spacing
for the balusters on the railing?

____________________
Bill Waller
New Eagle, PA