Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
kitchen electrical questions
Existing under sink 4-plex receptical (not sure its on one or two circuits,
well check later) serves: Garbage disposer Dish washer Hot water dispenser On a kitchen remodel what electrical outlet need to be dedicated? Garbadge disposer? Dish washer? Trash compactor? Hot water dispenser? Refrigerator? The existing above counter receptacles is on one GFI circuit, does the new NEC code require it be on two dedicated circuits? In removing the electrical double oven, I found the ground and neutral from the oven were connected together to the feeder neutral. The existing feeder is 3 black wires (2 hot, 1 neutral) plus a bare ground. Does it seem odd that the ground wire from this service was cut back at the junction box and both appliance ground and neutral were tied to feeder neutral? The main circuit breaker panel is grounded so there is no reason not the use the feeder ground, right? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Recomendation for kitchen | UK diy | |||
Routing laundry drain to kitchen drain possible? | Home Repair | |||
Help needed with kitchen electrical issue | Home Repair | |||
Finish questions for steel kitchen appliances | Metalworking | |||
Planit Millennium II [2 CDs] new !, and other Kitchen Design 3D programscheap software for fitted kitchen design | Woodworking |