Taping and Toilet
Hi, 2 questions from an amateur:
1. I drywalled and taped my bathroom. Unfortunately on one spot the taping is bubbling up (probably because there wasn't enough mud behind it). Should I cut out the bubbled part and just mud over it and re-sand? 2. The new toilet in the above mentioned bathroom "backwashes" a bit of toilet paper after the flush. Could this perhaps be caused by the water level that you set in the tank? Any and all help is much appreciated!! |
"rw" wrote in message ... Hi, 2 questions from an amateur: 1. I drywalled and taped my bathroom. Unfortunately on one spot the taping is bubbling up (probably because there wasn't enough mud behind it). Should I cut out the bubbled part and just mud over it and re-sand? 2. The new toilet in the above mentioned bathroom "backwashes" a bit of toilet paper after the flush. Could this perhaps be caused by the water level that you set in the tank? Any and all help is much appreciated!! I doubt that the two items are related.:)) Yes just cut out the bad and rework it. Could be the water level, the toilet design or too much paper. Colbyt |
All times are GMT +1. The time now is 06:32 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter