Question regarding cat5 Jacks Pt. 2
 

I've installed tooless Cat5 jacks on both ends of my cable using the T568A
convention;

PIN NUMBER COLOR
1 Green/White
2 Green
3 Orange/White
4 Blue
5 Blue/White
6 Orange
7 Brown/White
8 Brown

I purchased a Cat5e patch cord and noticed that these wire colors do not
match my jack colors.

They are set up the following way looking left to right with the snap
release pointed up and the connection towards you:

orange/white, orange, blue/white, blue, green/white, green, brown/white,
brown

Is this a problem ?? I feel that if as long as there is 8 wires, regardles
of the color coming out of the router, there is a path to send and recieve
data.

Am I correct ??

Thanks,
Ray

"Ray" wrote in message
news:meEqe.15327$mC.13478@okepread07...
I've installed tooless Cat5 jacks on both ends of my cable using the T568A
convention;

PIN NUMBER COLOR
1 Green/White
2 Green
3 Orange/White
4 Blue
5 Blue/White
6 Orange
7 Brown/White
8 Brown

I purchased a Cat5e patch cord and noticed that these wire colors do not
match my jack colors.

They are set up the following way looking left to right with the snap
release pointed up and the connection towards you:

orange/white, orange, blue/white, blue, green/white, green, brown/white,
brown

Is this a problem ?? I feel that if as long as there is 8 wires,
regardles
of the color coming out of the router, there is a path to send and recieve
data.

Am I correct ??

Thanks,
Ray

The wires in the cable are twisted so the solid and the solid/white are
together. One for the signal and one for a ground. This prevents what is
called cross talk, or one wire's signal mixing with the next wire. Just
looking at what you have , it may be that one is what they call a crossover
cable. That is some of the wires are reversed from one plug to the next.
They are made that way for several reasons. One is that you can hook 2
computers together with the crossover cable without a router. It only works
for two computers that way in a network. The cables are not
interchangable..

Ray wrote:

I've installed tooless Cat5 jacks on both ends of my cable using the T568A
convention;

PIN NUMBER COLOR
1 Green/White
2 Green
3 Orange/White
4 Blue
5 Blue/White
6 Orange
7 Brown/White
8 Brown

I purchased a Cat5e patch cord and noticed that these wire colors do not
match my jack colors.

They are set up the following way looking left to right with the snap
release pointed up and the connection towards you:

orange/white, orange, blue/white, blue, green/white, green, brown/white,
brown

Is this a problem ?? I feel that if as long as there is 8 wires, regardles
of the color coming out of the router, there is a path to send and recieve
data.

Am I correct ??

Thanks,
Ray


Hi,
On convention Blue is first pair but if you are just extending a cable,
all it matters is signal goes over on one on one basis without crossing
over.(straight thru cable). So in this case it won't matter.
Tony

Ray wrote:
I've installed tooless Cat5 jacks on both ends of my cable using the T568A
convention;

PIN NUMBER COLOR
1 Green/White
2 Green
3 Orange/White
4 Blue
5 Blue/White
6 Orange
7 Brown/White
8 Brown

I purchased a Cat5e patch cord and noticed that these wire colors do not
match my jack colors.


Ignore colors on purchased preassembled cables. Often they are made by
machines and have only a single color.

There are two types of cables, straight and twisted pair. There are two
types of sockets 568A and 568B. There is no such thing as a 568A/568B
cable so all you really want to do is know if its straight or cross-over.


They are set up the following way looking left to right with the snap
release pointed up and the connection towards you:

orange/white, orange, blue/white, blue, green/white, green, brown/white,
brown

Is this a problem ?? I feel that if as long as there is 8 wires, regardles
of the color coming out of the router, there is a path to send and recieve
data.


You can't relate the wire to the socket per-se.


Am I correct ??

Thanks,
Ray




Be sure to use good quality stuff and do good crimps. 100Mb full duplex
can be tough if your install is not good. I use toenail clippers to
trim off the wire beyond the connector edge. I also when possible use
store bought cable for outside of wall stuff. its just touchy getting
that 100Mb not to fall back to 10Mb or half-duplex.

--
Respectfully,


CL Gilbert