DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   RADON (https://www.diybanter.com/home-repair/110552-radon.html)

fish June 9th 05 03:05 AM

RADON
 
Has anyone ever treated their basement for RADON? Has anyone
experience or recommendation about this company and product:
http://www.radonloc.com/index.html this appeals to me because
obviously there wont be that fan running 24 hours a day, and it claims
to solve the problem.

Thanks,
Fish



No June 9th 05 01:41 PM

I have a mitigation system, fan and piping under slab. I also have a device
that measures the air pressure difference to tell me the system is
functional. Now, the piping was installed, just in case, during
construction. After construction a test was done. When radon levels were
detected all we needed to do was add the fan and the gauge. The fan is in
the attic, piping runs to below slab. I cant hear the fan, I do not even
know the system is running. I have no idea how much it costs to operate.
Cant be too much.

I would say this, its my opinion, that if you have an older house to not to
worry about radon. The houses are so leaky that the radon will dissipate on
its own anyway. If you have a new airtight home then it could be some cause
for concern although that is debated by some as well.

"fish" wrote in message
...
Has anyone ever treated their basement for RADON? Has anyone
experience or recommendation about this company and product:
http://www.radonloc.com/index.html this appeals to me because
obviously there wont be that fan running 24 hours a day, and it claims
to solve the problem.

Thanks,
Fish





[email protected] June 9th 05 01:57 PM


Read the topic "Radon - is it really a problem?" in this newsgroup. I
posted several suggestions in that thread, under a different name.
One main entry point for radon is the gap between the floor and the
wall; the floor is poured close to the end of construction, and
technically independent of the walls. You will have to seal all the way
around the edge with a polyurathane caulk. The EPA has a whole series
of books available on the topic (not sure if they still do). I read
them all. Their conclusion is that the only system that is effective is
a SSD (sub-slab depressurization) system. YMMV


fish wrote:
Has anyone ever treated their basement for RADON? Has anyone
experience or recommendation about this company and product:
http://www.radonloc.com/index.html this appeals to me because
obviously there wont be that fan running 24 hours a day, and it claims
to solve the problem.

Thanks,
Fish



Mark June 9th 05 05:59 PM

sounds like the same as dry loc paint

Mark


fish June 11th 05 07:46 PM

What do you think of the caulk sold on this website, would you use it?
Where could I get the caulk you are recommending?

THanks,
Fish



On 9 Jun 2005 05:57:57 -0700, wrote:


Read the topic "Radon - is it really a problem?" in this newsgroup. I
posted several suggestions in that thread, under a different name.
One main entry point for radon is the gap between the floor and the
wall; the floor is poured close to the end of construction, and
technically independent of the walls. You will have to seal all the way
around the edge with a polyurathane caulk. The EPA has a whole series
of books available on the topic (not sure if they still do). I read
them all. Their conclusion is that the only system that is effective is
a SSD (sub-slab depressurization) system. YMMV


fish wrote:
Has anyone ever treated their basement for RADON? Has anyone
experience or recommendation about this company and product:
http://www.radonloc.com/index.html this appeals to me because
obviously there wont be that fan running 24 hours a day, and it claims
to solve the problem.

Thanks,
Fish




All times are GMT +1. The time now is 08:24 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter