DIYbanter - Looking for retailer in Toronto selling 2-part epoxy concrete floor paint

DIYbanter (https://www.diybanter.com/)

- Home Repair (https://www.diybanter.com/home-repair/)

- - Looking for retailer in Toronto selling 2-part epoxy concrete floor paint (https://www.diybanter.com/home-repair/109414-looking-retailer-toronto-selling-2-part-epoxy-concrete-floor-paint.html)

Looking for retailer in Toronto selling 2-part epoxy concrete floor paint

Hi,

I'm preparing to paint my concrete garage floor and am having trouble
finding a retailer who sells 2-part epoxy concrete floor paint. I've
tried the local Home Depot but they only sell Behr 1-part epoxy. I
don't believe the solid content is high so that the film build is not
enough and I'm sceptical about the longevity of the finish.

I have about 40 square meters to cover which is about 5 liters per
coat. I'm thinking of two coats.

Can any one point me to a GTA retailer who may carry the product I'm
looking for? Thank in advance.

- Rob.

I have used the 1-part Behr product. Re-did my garage floor in 1999 with one
coat of their special primer and two coats of the finish product. This was
on new concrete with full acid etch and wash prior to coating the floor.

The finish is still sound but a little discoloured with salt residue. I am
thinking of a gentle power wash and a third coat this year to freshen up the
finish. I live just north of Toronto in Markham.

Try a good paint store that sells major brands, they can tell you what
2-part is available, better still check out the major brands specifications
on-line to see if they have what you want. I know there is a supplier in
Toronto that manufactures coatings for shop and warehouse floors, you may
have to dig to find it, as I don't recall their name.

"Rob" wrote in message
...
Hi,

I'm preparing to paint my concrete garage floor and am having trouble
finding a retailer who sells 2-part epoxy concrete floor paint. I've
tried the local Home Depot but they only sell Behr 1-part epoxy. I
don't believe the solid content is high so that the film build is not
enough and I'm sceptical about the longevity of the finish.

I have about 40 square meters to cover which is about 5 liters per
coat. I'm thinking of two coats.

Can any one point me to a GTA retailer who may carry the product I'm
looking for? Thank in advance.

- Rob.

On Sat, 4 Jun 2005 17:12:53 -0400, "Eric Tonks"
etonks@sunstormADD-DOT-COM wrote:

I have used the 1-part Behr product. Re-did my garage floor in 1999 with one
coat of their special primer and two coats of the finish product. This was
on new concrete with full acid etch and wash prior to coating the floor.

The finish is still sound but a little discoloured with salt residue. I am
thinking of a gentle power wash and a third coat this year to freshen up the
finish. I live just north of Toronto in Markham.

I'm putting the finish on unpainted concrete (garage is 18 years old
so the floor is not fresh). I'll do something similar to you .. fill
and patch any cracks, holes or nicks, sand, etch, prime and paint,
unless I find a ready-primed epoxy paint.

Try a good paint store that sells major brands, they can tell you what
2-part is available, better still check out the major brands specifications
on-line to see if they have what you want. I know there is a supplier in
Toronto that manufactures coatings for shop and warehouse floors, you may
have to dig to find it, as I don't recall their name.

I popped into Home Hardware today and noticed that they have a paint
sale until 18 June. Even better, they have Rustoleum 2 part epoxy
garage floor paint kit for $10 off -- regulatly $100, now $90. Four
kits will do two coats of a two car garage. I checked some more and
found an industrial supplier in Scarborough, Auklands-Grainger. They
sell all sorts of Rustoleum epoxy finishes and I think I will contact
them Monday. Rustoleum produce an Industrial version of the epoxy kit
that has higher film build (16mils), tougher abraision resistance and
greater coverage.

Thanks for the help,Eric.

Can any one point me to a GTA retailer who may carry the product I'm
looking for? Thank in advance.

- Rob.

Have used the prod from auklands-grainger wiht good success, rona.ca at
kennedy and 401 seems to carry a great selection and has knowledgable staff.
Surface prep is everything, make sure you etch till it hurts, specially on
any staind spots.
You plan on rolling or spraying the finish?

--

Remove the obvious to reply. Experienced and reliable
Concrete Finishing and Synthetic Stucco application in the GTA.
"Rob" wrote in message
...
On Sat, 4 Jun 2005 17:12:53 -0400, "Eric Tonks"
etonks@sunstormADD-DOT-COM wrote:

I have used the 1-part Behr product. Re-did my garage floor in 1999 with
one
coat of their special primer and two coats of the finish product. This
was
on new concrete with full acid etch and wash prior to coating the floor.

The finish is still sound but a little discoloured with salt residue. I
am
thinking of a gentle power wash and a third coat this year to freshen up
the
finish. I live just north of Toronto in Markham.

I'm putting the finish on unpainted concrete (garage is 18 years old
so the floor is not fresh). I'll do something similar to you .. fill
and patch any cracks, holes or nicks, sand, etch, prime and paint,
unless I find a ready-primed epoxy paint.

Try a good paint store that sells major brands, they can tell you what
2-part is available, better still check out the major brands
specifications
on-line to see if they have what you want. I know there is a supplier in
Toronto that manufactures coatings for shop and warehouse floors, you may
have to dig to find it, as I don't recall their name.

I popped into Home Hardware today and noticed that they have a paint
sale until 18 June. Even better, they have Rustoleum 2 part epoxy
garage floor paint kit for $10 off -- regulatly $100, now $90. Four
kits will do two coats of a two car garage. I checked some more and
found an industrial supplier in Scarborough, Auklands-Grainger. They
sell all sorts of Rustoleum epoxy finishes and I think I will contact
them Monday. Rustoleum produce an Industrial version of the epoxy kit
that has higher film build (16mils), tougher abraision resistance and
greater coverage.

Thanks for the help,Eric.

Can any one point me to a GTA retailer who may carry the product I'm
looking for? Thank in advance.

- Rob.

On Sun, 5 Jun 2005 01:12:49 -0400, "ConcreteFinishing&StuccoGuy"
wrote:

Have used the prod from auklands-grainger wiht good success, rona.ca at
kennedy and 401 seems to carry a great selection and has knowledgable staff.

Thanks. That Rona is close to where I live so I'll look them up
today.

Surface prep is everything, make sure you etch till it hurts, specially on
any staind spots.
You plan on rolling or spraying the finish?

Rolling it on. Spraying is messy and needs lots of cleanup
afterwards. I can just toss the roller cover after I'm finished.

Use the Rustoleum Labor-Saver 2-part epoxy (the solvent is xylene, and
is available here in the states). In my experience, the water-based
epoxies
do not have the durability of the organic-solvent epoxies. As stated
below, prep is everything (and don't drive on it for days).
Use rollers that are for solvent-based finishes, and you will have a
phenomenal floor. Every time I do one of these floors, I swear I will
never do it again (given the amount of work), but the end product looks
so good, that I will.

Rob wrote:
On Sun, 5 Jun 2005 01:12:49 -0400, "ConcreteFinishing&StuccoGuy"
wrote:

Have used the prod from auklands-grainger wiht good success, rona.ca at
kennedy and 401 seems to carry a great selection and has knowledgable staff.

Thanks. That Rona is close to where I live so I'll look them up
today.

Surface prep is everything, make sure you etch till it hurts, specially on
any staind spots.
You plan on rolling or spraying the finish?

Rolling it on. Spraying is messy and needs lots of cleanup
afterwards. I can just toss the roller cover after I'm finished.

Rob ) said...

I'm preparing to paint my concrete garage floor and am having trouble
finding a retailer who sells 2-part epoxy concrete floor paint. I've
tried the local Home Depot but they only sell Behr 1-part epoxy.

I know last fall Home Depots in the Toronto area did carry a 2-part
epoxy product. It came in a kit for about $90-$100 that would cover
the typical 1-car garage (about 20 sq.m or 200 sq.ft).

I haven't looked recently, so I suppose if it wasn't selling well, they
may have stopped carrying it.

--
Calvin Henry-Cotnam
"Never ascribe to malice what can equally be explained by incompetence."
- Napoleon
-------------------------------------------------------------------------
NOTE: if replying by email, remove "remove." and ".invalid"