Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
OT? Mower problem
Getting ready to take a Snapper 26" w/B&S 7 hp back to dealer for warranty
work. Since I'm not very mechanically inclined, would like to know if anyone can give me any insight b/4 it goes back. Picked this up less than 2 weeks ago, new. After my first mowing, it had a miss in it, so to the dealer it went. Had a carburetor leak. The second mowing went fine. Now, went to mow for the third time and the pull start was "locked". It wouldn't pull for anything. After a few tries, it pulled fine. Had to refuel during the mow, and pulled fine. B/4 I put it away, I cleaned under the mower, fueled up, and tried to start. It's like froze again. I'm sure my problem will be resolved at the dealer, but does anyone know what could be causing this lock out on the pull start? I'm beginning to think I got a lemon / |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Paslode IM250A Cordless Finish Nailer, Stripped Treads Problem | Woodworking | |||
Widespread problem with HP Omnibook XE3-GFs? | Electronics Repair | |||
Problem with room getting too hot from facing the south (even in late October) | Home Repair | |||
Water Pump / Pressure Tank Problem !!!!!! | Home Ownership | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair |