I haven't been to this group in awhile, so hello all.

I have a screened porch that is 14' x 14', and is surrounded by an uncovered
deck (Trex). The floor of the porch is (I'm pretty sure) tig fir, and the
wood itself seems in good shape.

I want to know if there's a material I can put over that floor, possibly
vinly, or anything else, for that matter. This is New England, so things
freeze in the winter, and screened porches get all the weather when the wind
blows. This home is 40 yrs old, and the hand-built screens themselves will
have to be replaced soon anyhow, so thickness of a new material isn't a real
concern. I would love to do tile or somthing like that, but there is a lot
of flex in the existing floor. I'm a lightweight, but I make things rattle
on the table just by walking out there, and heavier friends can actually
bounce things.
That I can live with, but my knees complain too much for me to paint floors
anymore, and this one needs it more and more often it seems.

Underneath there is varying space, probably 12" to 14", then earth
underneath. I would love to put down something substantial out there for a
floor (tile or Chicago brick), but being in New England that seems a bad
choice, given the freeze-thaw conditions in winter. I suppose I could
increase rigidity by cutting a few holes in the existing flooring and
installing some permanent jacks, but I'd like something simpler, even if
things do still bounce around.

Has anyone laid down vinyl flooring in a situation like this? Are there
composite boards that aren't made for decking, and therefore aren't an inch
thick? Can I get vinyl that's 14' wide and take my chances?

"k" wrote in message
ink.net...
I haven't been to this group in awhile, so hello all.

I have a screened porch that is 14' x 14', and is surrounded by an
uncovered
deck (Trex). The floor of the porch is (I'm pretty sure) tig fir, and the
wood itself seems in good shape.

I want to know if there's a material I can put over that floor, possibly
vinly, or anything else, for that matter. This is New England, so things
freeze in the winter, and screened porches get all the weather when the
wind
blows. This home is 40 yrs old, and the hand-built screens themselves
will
have to be replaced soon anyhow, so thickness of a new material isn't a
real
concern. I would love to do tile or somthing like that, but there is a
lot
of flex in the existing floor. I'm a lightweight, but I make things
rattle
on the table just by walking out there, and heavier friends can actually
bounce things.
That I can live with, but my knees complain too much for me to paint
floors
anymore, and this one needs it more and more often it seems.

Underneath there is varying space, probably 12" to 14", then earth
underneath. I would love to put down something substantial out there for
a
floor (tile or Chicago brick), but being in New England that seems a bad
choice, given the freeze-thaw conditions in winter. I suppose I could
increase rigidity by cutting a few holes in the existing flooring and
installing some permanent jacks, but I'd like something simpler, even if
things do still bounce around.

Has anyone laid down vinyl flooring in a situation like this? Are there
composite boards that aren't made for decking, and therefore aren't an
inch
thick? Can I get vinyl that's 14' wide and take my chances?

I'd try some of those interlocking rubber mats with drain holes like they
use in restraunt kitchens. Whatever you put down will rot the wood out
eventually, but letting it breath some may buy you a few years.

I hear you on the knees. I plan my trips under the desk to fuss with cables
very carefully now, and keep the painkillers handy for the mornings when I
have to brush teeth with one hand and lean on vanity with the other.

aem sends...

"ameijers" wrote in
message
...

"k" wrote in message
ink.net...
I haven't been to this group in awhile, so hello
all.

I have a screened porch that is 14' x 14', and is
surrounded by an
uncovered
deck (Trex). The floor of the porch is (I'm pretty
sure) tig fir, and the
wood itself seems in good shape.

I want to know if there's a material I can put over
that floor, possibly
vinly, or anything else, for that matter. This is
New England, so things
freeze in the winter, and screened porches get all
the weather when the
wind
blows. This home is 40 yrs old, and the hand-built
screens themselves
will
have to be replaced soon anyhow, so thickness of a
new material isn't a
real
concern. I would love to do tile or somthing like
that, but there is a
lot
of flex in the existing floor. I'm a lightweight,
but I make things
rattle
on the table just by walking out there, and heavier
friends can actually
bounce things.
That I can live with, but my knees complain too much
for me to paint
floors
anymore, and this one needs it more and more often
it seems.

Underneath there is varying space, probably 12" to
14", then earth
underneath. I would love to put down something
substantial out there for
a
floor (tile or Chicago brick), but being in New
England that seems a bad
choice, given the freeze-thaw conditions in winter.
I suppose I could
increase rigidity by cutting a few holes in the
existing flooring and
installing some permanent jacks, but I'd like
something simpler, even if
things do still bounce around.

Has anyone laid down vinyl flooring in a situation
like this? Are there
composite boards that aren't made for decking, and
therefore aren't an
inch
thick? Can I get vinyl that's 14' wide and take my
chances?

I'd try some of those interlocking rubber mats with
drain holes like they
use in restraunt kitchens. Whatever you put down will
rot the wood out
eventually, but letting it breath some may buy you a
few years.

I hear you on the knees. I plan my trips under the
desk to fuss with cables
very carefully now, and keep the painkillers handy
for the mornings when I
have to brush teeth with one hand and lean on vanity
with the other.

aem sends...




And I hear that too, about leaning on the vanity. I
took the opportunity, when I added a tub room for an
oversized tub, to place the sink up at MY level (I'm
tall) so I could wash up without stooping. The
mirror's at MY height, and I can actually see my hair
without stooping, another godsend, now I've been forced
into retirement for health reasons.
Pretty un-standard, no one else can brush their
teeth in there, which is great; I get the facilities to
myself most of the time. ;-} Looks funny to most
people, but it looks fantastic to me!! Only downside:
my wife makes me clean it, what's at my height, since
I'm the only user of most of the room. She does the
low work, I do the high work. Jack Spratt...
Don't do it unless you have others at the correct
dims though! Now, back to raising the toilet up...

Pop