Frost line depth map?
 

I live in Fairfax, VT, zip is 05454. I'm building a deck, and I'm going to
be pouring concrete into sonotubes. Everything I've read states that the
bottom of the sonotube must be below the frost line. Nowhere does it state
how deep that might be. I assume that the USDA or the department of the
Interior must have a map on this kinda thing, but for the life of me, I
can't find it. Any ideas?

Tim and Steph wrote:

I live in Fairfax, VT, zip is 05454. I'm building a deck, and I'm going to
be pouring concrete into sonotubes. Everything I've read states that the
bottom of the sonotube must be below the frost line. Nowhere does it state
how deep that might be. I assume that the USDA or the department of the
Interior must have a map on this kinda thing, but for the life of me, I
can't find it. Any ideas?



Hi,
You local building inspector ought to know or building contrators.
It's 6 feet where I live.(Alberta). I don't think your wether is colder
than ours in winter.
Tony

"Tim and Steph" wrote in message
news:F77fe.589$N_5.54@trndny09...
I live in Fairfax, VT, zip is 05454. I'm building a deck, and I'm going
to
be pouring concrete into sonotubes. Everything I've read states that the
bottom of the sonotube must be below the frost line. Nowhere does it
state
how deep that might be. I assume that the USDA or the department of the
Interior must have a map on this kinda thing, but for the life of me, I
can't find it. Any ideas?




The USDA Zone map might be a good guideline. I am in Zone 6 next door to
you. Bottom of footing 18" below finished grade here.

Your local building inspection office can tell you for sure what it is in
your area.

BTW, around here at grade decks just float. Not sure what the rules are for
those over 8' off the ground.

Colbyt

"Tim and Steph" wrote in message
news:F77fe.589$N_5.54@trndny09...
I live in Fairfax, VT, zip is 05454. I'm building a deck, and I'm going to
be pouring concrete into sonotubes. Everything I've read states that the
bottom of the sonotube must be below the frost line. Nowhere does it state
how deep that might be. I assume that the USDA or the department of the
Interior must have a map on this kinda thing, but for the life of me, I
can't find it. Any ideas?

The building inspector will know. Here it is 48" May bell be that in your
area a bit north of me.

"Edwin Pawlowski" wrote in message
...
The building inspector will know. Here it is 48" May bell be that in your
area a bit north of me.


Edwin where are you? Someplace cold I see.


Colbyt

Tim and Steph wrote:
I live in Fairfax, VT, zip is 05454. I'm building a deck, and I'm going to
be pouring concrete into sonotubes. Everything I've read states that the
bottom of the sonotube must be below the frost line. Nowhere does it state
how deep that might be. I assume that the USDA or the department of the
Interior must have a map on this kinda thing, but for the life of me, I
can't find it. Any ideas?



You need a local source, building inspectors,
contractors, etc. Depth of frost can vary
tremendously over a short distance. And those
that use the published depths may end up with
major repairs during an extreme year. For your
purpose it is probably not that critical.

Frost line depth map?
 

slatts wrote:

Tim and Steph Wrote:

I live in Fairfax, VT, zip is 05454. I'm building a deck, and I'm going
to
be pouring concrete into sonotubes. Everything I've read states that
the
bottom of the sonotube must be below the frost line. Nowhere does it
state
how deep that might be. I assume that the USDA or the department of
the
Interior must have a map on this kinda thing, but for the life of me,
I
can't find it. Any ideas?


I live in Toronto. We're around the same latitude, and 42" is the
standard here. Building codes must err well on the safe side, so 42"
is probably more than safe. Unless you plan to have your local
government issue a building permit, then I can assure you that 42" is
perfectly safe.


Hi,
I am in Calgary. We go down 4 to 5 feet.
Local building inspector ought to know.

I live in Toronto. We're around the same latitude, and 42" is the standard here. Building codes must err well on the safe side, so 42" is probably more than safe. Unless you plan to have your local government issue a building permit, then I can assure you that 42" is perfectly safe.

Frost line depth map?
 

"slatts" wrote in message
...

Tim and Steph Wrote:
I live in Fairfax, VT, zip is 05454. I'm building a deck, and I'm going
to
be pouring concrete into sonotubes. Everything I've read states that
the
bottom of the sonotube must be below the frost line. Nowhere does it
state
how deep that might be. I assume that the USDA or the department of
the
Interior must have a map on this kinda thing, but for the life of me,
I
can't find it. Any ideas?

I live in Toronto. We're around the same latitude, and 42" is the
standard here. Building codes must err well on the safe side, so 42"
is probably more than safe. Unless you plan to have your local
government issue a building permit, then I can assure you that 42" is
perfectly safe.


--
slatts

Five feet would definately do you, but call 802 849-6111 and talk to the
building inspector first.

Bill

Frost line depth map?
 

Tony Hwang wrote:
slatts wrote:

Tim and Steph Wrote:
I live in Fairfax, VT, zip is 05454. I'm building a deck, and I'm going
to
be pouring concrete into sonotubes. Everything I've read states that
the
bottom of the sonotube must be below the frost line. Nowhere does it
state
how deep that might be. I assume that the USDA or the department of
snip...
Hi,
I am in Calgary. We go down 4 to 5 feet.
Local building inspector ought to know.

You got that exactly right. The magic number is whatever the local code
says it is and they aren't going to let facts about actual frost depth
into their considerations. In questions like this, it is always
mandatory to know what the local code says and then to stick to that or
go a little further. In the more restrictive codes they will also
require that the soil at the bottom of the hole is undisturbed
(generally worded something like "undisturbed mineral soil") and that
the area of the pour is sufficient to support the structure above.

--
John McGaw
[Knoxville, TN, USA]
http://johnmcgaw.com

Frost line depth map?
 

In article , slatts.28gjk5
@diybanter.com says...

Tim and Steph Wrote:
I live in Fairfax, VT, zip is 05454. I'm building a deck, and I'm going
to
be pouring concrete into sonotubes. Everything I've read states that
the
bottom of the sonotube must be below the frost line. Nowhere does it
state
how deep that might be. I assume that the USDA or the department of
the
Interior must have a map on this kinda thing, but for the life of me,
I
can't find it. Any ideas?

My server doesn't have the original post...

I live right down the street from you (Essex Junction). Depending
on your soil type frost can go down a *lot* further than common
knowledge. Several years ago, during a particularly cold stretch,
water mains all around Chittenden County froze and broke 7-8' under
roads.

I put my sonotubes down 48". Over the past ten or so years, they've
pushed out at least 2' (one completely). Every year I have to
relevel the deck, often requiring a concrete saw to cut the pillar.
I was told 48" but it clearly wasn't enough for my soil (clay on
ledge). With all the rain, it'll likely be mid July before I can
do it this year. :-(

I live in Toronto. We're around the same latitude, and 42" is the
standard here. Building codes must err well on the safe side, so 42"
is probably more than safe. Unless you plan to have your local
government issue a building permit, then I can assure you that 42" is
perfectly safe.

42" isn't even close. Also, backfill the sonotubes with gravel,
*NOT* dirt.

--
Keith

Frost line depth map?
 

On Sat, 27 May 2006 09:21:47 +0100, slatts
wrote:


Tim and Steph Wrote:
I live in Fairfax, VT, zip is 05454. I'm building a deck, and I'm going
to
be pouring concrete into sonotubes. Everything I've read states that
the
bottom of the sonotube must be below the frost line. Nowhere does it
state
how deep that might be. I assume that the USDA or the department of
the
Interior must have a map on this kinda thing, but for the life of me,
I
can't find it. Any ideas?


If you've got solid rock anywhere within 8', ignore the code
limits and go right to the bottom.

Frost line depth map?
 

Goedjn wrote:
On Sat, 27 May 2006 09:21:47 +0100, slatts
wrote:


Tim and Steph Wrote:

I live in Fairfax, VT, zip is 05454. I'm building a deck, and I'm going
to
be pouring concrete into sonotubes. Everything I've read states that
the
bottom of the sonotube must be below the frost line. Nowhere does it
state
how deep that might be. I assume that the USDA or the department of
the
Interior must have a map on this kinda thing, but for the life of me,
I
can't find it. Any ideas?


If you've got solid rock anywhere within 8', ignore the code
limits and go right to the bottom.


8 inches SHOULD be enough.

Wikipedia states that the length of time that the air temp is below
freezing and the time that the air temp remains below freezing are both
important factors.

According to weather.com

Fairfax has about 90 days where the average high temp does not get above
freezing but record lows put below freezing temps for all months except 3.

I suggest that you consult with

A. Local building permit authorities
B. Local Agricultural Dept officials (state or Federal)

To get more information on local conditions.

If you have STONE several inches below the soil, then if you reach
stone, you have a stable foundation regardless of frost Line conditions.