I moved to an old house last summer. It has no central a/c, so we've
used window air conditioners. Yesterday we put up one of the units. The
cheaply made thingys on the sides that supposedly slide out and fill
the gap between the unit and the side of the window are almost useless.


Can anyboy suggested an easy way to fill this spot and maybe provide a
little insulation too?

Thanks,
Susan

On Mon, 18 Apr 2005 09:58:21 -0700, sus5n.1ynn wrote:

Can anyboy suggested an easy way to fill this spot and maybe provide a
little insulation too?

5/8" Plywood.

--
If you're not on the edge, you're taking up too much space.
Linux Registered User #327951

wrote in message I The
cheaply made thingys on the sides that supposedly slide out and fill
the gap between the unit and the side of the window are almost useless.

Can anyboy suggested an easy way to fill this spot and maybe provide a
little insulation too?

The sides are not structural so you can use most any material. An inch of
Styrofoam will work. A piece of hardboard or plywood will also.

"Dan C" wrote in message
news
5/8" Plywood.

I prefer 19/32"

used to use window units, used cardboard and ducttape to seal em up
every year. easy to put up, easy to take down.. lucas