Home |
Search |
Today's Posts |
#1
|
|||
|
|||
"Normal" compact fluorescent bulb in 3-way lamp safe?
I've seen some mixed messages, even from labs and government sites,
about whether "normal" CFL bulbs can be used safely in 3-way lamps. Some say flatly Yes, others No. But I haven't seen much about this in general. Can someone point me to a definitive site, or answer this one? The reason I'd like to be able to use regular CFLs is, of course, lower cost. But unless I can determine finally that it is safe to do so, obviously I'll have to assume otherwise and not use them. Thanks. --Duffy Tweedy |
#2
|
|||
|
|||
In article ,
Duffy Tweedy wrote: I've seen some mixed messages, even from labs and government sites, about whether "normal" CFL bulbs can be used safely in 3-way lamps. Some say flatly Yes, others No. But I haven't seen much about this in general. Can someone point me to a definitive site, or answer this one? The reason I'd like to be able to use regular CFLs is, of course, lower cost. But unless I can determine finally that it is safe to do so, obviously I'll have to assume otherwise and not use them. Thanks. Should work fine except the switch will work "funny", the same funny as if you put a standard bulb in a 3 way lamp. -- Rich Greenberg N6LRT Marietta, GA, USA richgr atsign panix.com + 1 770 321 6507 Eastern time zone. I speak for myself & my dogs only. VM'er since CP-67 Canines:Val, Red & Shasta (RIP),Red, husky Owner:Chinook-L Atlanta Siberian Husky Rescue. www.panix.com/~richgr/ Asst Owner:Sibernet-L |
#3
|
|||
|
|||
On 24 Aug 2004 09:48:30 -0700, someone wrote:
I've seen some mixed messages, even from labs and government sites, about whether "normal" CFL bulbs can be used safely in 3-way lamps. What's the danger? Seriously. The 3-way switch doesn't change the voltage, it just steers the power to one, the other, or both of two "hot" contacts on the bulb (and there is a common neutral). One filament is "low", the second is "medium", and both together is "high". What is the danger to the bulb? Now, I'm not sure if it ends up working "off-on-off-on" or "off-off-on-on" and I suppose this could be a danger to a person putting their finger in the socket thinking it is a regualr bulb that is really "off". But that's not because its a CFL. ??? -v. |
#4
|
|||
|
|||
Duffy Tweedy wrote:
I've seen some mixed messages, even from labs and government sites, about whether "normal" CFL bulbs can be used safely in 3-way lamps. Some say flatly Yes, others No. But I haven't seen much about this in general. Can someone point me to a definitive site, or answer this one? The reason I'd like to be able to use regular CFLs is, of course, lower cost. But unless I can determine finally that it is safe to do so, obviously I'll have to assume otherwise and not use them. Thanks. --Duffy Tweedy A CFL bulb in a standard 3-way fixture is perfectly safe. |
#5
|
|||
|
|||
"Travis Jordan" wrote in message ...
Duffy Tweedy wrote: I've seen some mixed messages, even from labs and government sites, about whether "normal" CFL bulbs can be used safely in 3-way lamps. Some say flatly Yes, others No. But I haven't seen much about this in general. Can someone point me to a definitive site, or answer this one? The reason I'd like to be able to use regular CFLs is, of course, lower cost. But unless I can determine finally that it is safe to do so, obviously I'll have to assume otherwise and not use them. Thanks. --Duffy Tweedy A CFL bulb in a standard 3-way fixture is perfectly safe. Correct. It will only light at one level, that of the bulb rating. Harry K |
#6
|
|||
|
|||
"Travis Jordan" wrote in message ...
Duffy Tweedy wrote: I've seen some mixed messages, even from labs and government sites, about whether "normal" CFL bulbs can be used safely in 3-way lamps. Some say flatly Yes, others No. But I haven't seen much about this in general. Can someone point me to a definitive site, or answer this one? The reason I'd like to be able to use regular CFLs is, of course, lower cost. But unless I can determine finally that it is safe to do so, obviously I'll have to assume otherwise and not use them. Thanks. --Duffy Tweedy A CFL bulb in a standard 3-way fixture is perfectly safe. There are also 3-way CFLs. I haven't been particularly impressed, but they do work. -- Chris Green |
#7
|
|||
|
|||
|
#8
|
|||
|
|||
The danger is that if the contacts on the base of the bulb are designed
differently, you could dead short the circuit. -- Christopher A. Young Learn more about Jesus www.lds.org www.mormons.com "v" wrote in message ... On 24 Aug 2004 09:48:30 -0700, someone wrote: I've seen some mixed messages, even from labs and government sites, about whether "normal" CFL bulbs can be used safely in 3-way lamps. What's the danger? Seriously. The 3-way switch doesn't change the voltage, it just steers the power to one, the other, or both of two "hot" contacts on the bulb (and there is a common neutral). One filament is "low", the second is "medium", and both together is "high". What is the danger to the bulb? Now, I'm not sure if it ends up working "off-on-off-on" or "off-off-on-on" and I suppose this could be a danger to a person putting their finger in the socket thinking it is a regualr bulb that is really "off". But that's not because its a CFL. ??? -v. |
#9
|
|||
|
|||
"Stormin Mormon" wrote in message ...
The danger is that if the contacts on the base of the bulb are designed differently, you could dead short the circuit. No possibility: think about it. Not if the bulb were designed for a conventional socket. Even if it shorted the two center contacts, the only thing you would be shorting out is the two wires from the switched side of the control, and it would switch on-on-off-off. -- Chris Green |
#10
|
|||
|
|||
The three way has a center, a "ring" and a ground, which is the threads.
If the CF, the threads go too far in, it is possible to power the "ring" contact, which is now touching the ground. just thinking out loud, here. -- Christopher A. Young Learn more about Jesus www.lds.org www.mormons.com "Christopher Green" wrote in message om... "Stormin Mormon" wrote in message ... The danger is that if the contacts on the base of the bulb are designed differently, you could dead short the circuit. No possibility: think about it. Not if the bulb were designed for a conventional socket. Even if it shorted the two center contacts, the only thing you would be shorting out is the two wires from the switched side of the control, and it would switch on-on-off-off. -- Chris Green |
#11
|
|||
|
|||
On Fri, 27 Aug 2004 19:34:25 -0400, someone wrote:
If the CF, the threads go too far in, it is possible to power the "ring" contact, which is now touching the ground. just thinking out loud, here. Are you saying that CF bulbs are actually manufactured that way - or IF they were, then it would be a problem? Hell, IF regular bulbs were manufactured that way, then that would also be a problem. But somehow it seems pefectly "safe" to screw a regular bulb into a 3-way socket. Are you saying that the manufacturers of CF bulbs don't know about this? -v. |
#12
|
|||
|
|||
On Fri, 27 Aug 2004 19:34:25 -0400, "Stormin Mormon"
wrote: The three way has a center, a "ring" and a ground, which is the threads. If the CF, the threads go too far in, it is possible to power the "ring" contact, which is now touching the ground. just thinking out loud, here. Only a really badly manufactured base could do that. Same problem would be possible with a really badly manufactured incandescent. All it would do is blow a breaker. -- Chris Green |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Compact Fluorescent Lights w/ controls | Home Ownership | |||
Samsung HLN4365W HDTV Lamp Dies | Electronics Repair | |||
Flicker of compact fluorescent lamps | UK diy | |||
Looking for screw-in dinger with normal bulb base | Home Repair | |||
Lava Lamp bulb type | Home Repair |