I had someone come out and pressure test my showers as the vinyl pan liner
had been cut out as it was holding water a few months back and tile was
delayed. He says that in one of the showers on a slab, there is seepage,
based on him pumping up the drain line between fittings using inflatable
baloons. His price to replace the drain line is very expensive. Most of
it is to demo the concrete in the shower so he can get to the drain and
replace the section to where it hits the T. I am considering breaking it
out myself and just having him do the drain work. It this a difficult job.
Would a hammer drill and or a jack hammer work. I guess one just has to be
careful not to hit the line!

Also he says that the drains should be power cleaned with a jet and that the
drain in the shower is 1 1/2" and should be 2". Also, what is in there now
is a vinyl shower pan as is upstairs in the house as well. After the drain
is replaced, do you folks recommend a vinyl or hot mopped shower pan? Can
someone help? Thanks.