Home Ownership (misc.consumers.house)

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to misc.consumers.house
external usenet poster
 
Posts: 34
Default Water Hammer When Turning Faucet On ?

Hello,

Have the typical single-handle Delta faucet in our kitchen.

Has recently in the last few weeks developed a water hammer when turning it
such that the cold water is put On.
Water hammer only when turning On.

So, I guess this would not be classified as the typical water hammer, as
true water hammer I see from other posts is only when a valve is turned off.

So, I replaced the two springs and rubber "top-hat" gaskets in the faucet
that contact the ball.

Still have the water hammer.

I did a pretty good Google search, but can't find anything much related to
the hammer like noise when turning the water on. The suggestions and posts
are pretty much confined to the noise when a valve turns off.

Possibilities mentioned included loose pipe hanger or loose piping, or too
high water p.

Checked these, and can't find anything wrong.

Any thoughts on what might be the problem, and what to do about it other
than replacing the faucet with a new one (which may not solve the problem
?)?

Thanks,
Bob



  #2   Report Post  
Posted to misc.consumers.house
external usenet poster
 
Posts: 613
Default Water Hammer When Turning Faucet On ?

On Tue, 17 Feb 2009 15:33:29 -0500, "Robert11"
wrote:

Hello,

Have the typical single-handle Delta faucet in our kitchen.

Has recently in the last few weeks developed a water hammer when turning it
such that the cold water is put On.
Water hammer only when turning On.

So, I guess this would not be classified as the typical water hammer, as
true water hammer I see from other posts is only when a valve is turned off.

So, I replaced the two springs and rubber "top-hat" gaskets in the faucet
that contact the ball.

Still have the water hammer.

I did a pretty good Google search, but can't find anything much related to
the hammer like noise when turning the water on. The suggestions and posts
are pretty much confined to the noise when a valve turns off.

Possibilities mentioned included loose pipe hanger or loose piping, or too
high water p.

Checked these, and can't find anything wrong.

Any thoughts on what might be the problem, and what to do about it other
than replacing the faucet with a new one (which may not solve the problem
?)?


AFAIK, water hammer is water hammer, off or on. The faucet won't
likely fix anything. Perhaps you have a hammer arrestor that is full
of water? Try draining the pipe to try to get some air into the
arrestor. It's free, so worth a try.

  #3   Report Post  
Posted to misc.consumers.house
external usenet poster
 
Posts: 54
Default Water Hammer When Turning Faucet On ?

Check any cut off valve in its path. Make sure they are all wide open.


Has recently in the last few weeks developed a water hammer when turning
it
such that the cold water is put On.
Water hammer only when turning On.



  #4   Report Post  
Posted to misc.consumers.house
external usenet poster
 
Posts: 34
Default For Bill From OP: Water Hammer When Turning Faucet On ?

Hi Bill,

Thanks for suggestion.
Not all that sharp with this stuff, so please bear with me.

What is a cut-off valve ?
Do you mean a check-valve ?

Thanks again,
Bob
---------------------
"Bill" wrote in message
...
Check any cut off valve in its path. Make sure they are all wide open.


Has recently in the last few weeks developed a water hammer when turning
it
such that the cold water is put On.
Water hammer only when turning On.





  #5   Report Post  
Posted to misc.consumers.house
external usenet poster
 
Posts: 54
Default For Bill From OP: Water Hammer When Turning Faucet On ?

The valve used to stop the flow of water to the fixture.


"Robert11" wrote in message
...
Hi Bill,

Thanks for suggestion.
Not all that sharp with this stuff, so please bear with me.

What is a cut-off valve ?
Do you mean a check-valve ?

Thanks again,
Bob
---------------------
"Bill" wrote in message
...
Check any cut off valve in its path. Make sure they are all wide open.


Has recently in the last few weeks developed a water hammer when turning
it
such that the cold water is put On.
Water hammer only when turning On.







Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Water Hammer In Kitchen Faucet Robert11[_2_] Home Repair 12 December 24th 17 08:59 PM
Hot water hammer, slow flow after draining water heater. RJG Home Repair 4 March 22nd 07 07:19 PM
Can the repairs to the City Water Main Cause Burst Pipes through Water Hammer [email protected] Home Repair 7 August 11th 06 03:12 AM
Continual water hammer when running hot water Adam Preble Home Repair 8 May 10th 06 05:39 AM
Water piper knocking - is this 'water hammer' Crag UK diy 6 April 16th 06 12:06 PM


All times are GMT +1. The time now is 06:14 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"