DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Ownership (https://www.diybanter.com/home-ownership/)
-   -   Unused Chest Freezer (https://www.diybanter.com/home-ownership/192666-unused-chest-freezer.html)

[email protected] February 18th 07 09:51 PM

Unused Chest Freezer
 
currently have a new chest freezer that I am not currently using.
It has never been plugged in nor is anything stored in it.

Do I need to take any special care with it? Someone is telling me
that the air will go stagnant and later when filled with food could
ruin anything that is placed in it.


I am very sceptical...any thoughts or advice?


[email protected] February 19th 07 01:56 AM

Unused Chest Freezer
 
On Feb 18, 3:44 pm, Alan wrote:
On 18 Feb 2007 13:51:03 -0800,
wrote:

currently have a new chest freezer that I am not currently using.
It has never been plugged in nor is anything stored in it.


Do I need to take any special care with it? Someone is telling me
that the air will go stagnant and later when filled with food could
ruin anything that is placed in it.


I am very sceptical...any thoughts or advice?


I'd be skeptical, too!.

After all, once they finish manufacturing each freezer, they
close it, and it stays that way for months, or longer, until
it is purchased and put into use.

Alan Moorman


I wouldn't be worried about odors either.
But I've had a chest freezer that I used for some years, then did not
use for some years. When I plugged it in, the compressor was stuck.
I couldn't un-stick it no matter what I tried. I ended up giving it
to a local repair business to fix and re-sell. I've been told that
the reed valves in the things corrode from moisture in the
refrigerant (hmm, that'd be poor manufacturing...) and once stuck,
they are difficult/impossible to unstick.
I wonder if that applies to brand new units as well?


v February 26th 07 10:24 PM

Unused Chest Freezer
 
On Sun, 18 Feb 2007 16:44:46 -0600, someone wrote:

After all, once they finish manufacturing each freezer, they
close it, and it stays that way for months, or longer, until
it is purchased and put into use.

Ah, but that is the original equipment factory air!


Reply to NG only - this e.mail address goes to a kill file.


All times are GMT +1. The time now is 11:12 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter