Sturdy window fan
 

Hi,

I would like to purchase a window fan for one of two windows (24" x 24"
or 35" w x 21" h) but have been surprised by the poor quality of fans I
see in stores. Can anyone recommend a model with perhaps three speeds
and of build that will last more than a few years?

We will use the fan to help cool a small 1100 sq ft house off in the
summer after the sun has gone down (we are in southern California).

Steve

Sturdy window fan
 

I'm in the La Crescenta area so I understand the need for a fan. Take
a look at www.vermontcountrystore.com and look for item 17602. It's
all all metal dual. Not cheap!

Harry


wrote:

Hi,

I would like to purchase a window fan for one of two windows (24" x 24"
or 35" w x 21" h) but have been surprised by the poor quality of fans I
see in stores. Can anyone recommend a model with perhaps three speeds
and of build that will last more than a few years?

We will use the fan to help cool a small 1100 sq ft house off in the
summer after the sun has gone down (we are in southern California).

Steve

Sturdy window fan
 

wrote in message
oups.com...
Hi,

I would like to purchase a window fan for one of two windows (24" x 24"
or 35" w x 21" h) but have been surprised by the poor quality of fans I
see in stores. Can anyone recommend a model with perhaps three speeds
and of build that will last more than a few years?

We will use the fan to help cool a small 1100 sq ft house off in the
summer after the sun has gone down (we are in southern California).

Steve


My brother had a larger house (1350SF) that he cooled with a combination of
10K BTU window A/C unit, centrally located, and a dehumidifier with a (I
think it was 5 gallon) collection tank. He paid a little over a hundred
bucks for the dehumidifier, and the A/C was used, so cost next to nothing.
It worked surprisingly well. The A/C wasn't strong enough to dehumidify the
whole house (humidity is what makes a house uncomfortable, not heat), but
the dehumidifier was. The A/C WAS strong enough to keep the house cool
(~74F, which feels cold at low humidity). Central air conditioning!
Install it yourself! Supposedly, his electric bill didn't go up too much,
either. -Dave

Sturdy window fan
 

Mike T. wrote:

My brother had a larger house (1350SF) that he cooled with a combination of
10K BTU window A/C unit, centrally located, and a dehumidifier...

That's a BAD idea, with the dehumidifier dumping heat indoors.

Nick

Sturdy window fan
 

Hi Steve,

Have you thought about a "whole house" fan, otherwise known as an attic
fan? We've got one in our 1,300 sq ft home and it makes quite a
difference. ;-)

Here is a link to learn more about how they work and how well they work:

http://www.powerhousetv.com/stellent...bu_000599.hcsp
Hi,

I would like to purchase a window fan for one of two windows (24" x 24"
or 35" w x 21" h) but have been surprised by the poor quality of fans I
see in stores. Can anyone recommend a model with perhaps three speeds
and of build that will last more than a few years?

We will use the fan to help cool a small 1100 sq ft house off in the
summer after the sun has gone down (we are in southern California).

Steve

Sturdy window fan
 

Sturdy window fan
 

wrote in message
...
Mike T. wrote:

My brother had a larger house (1350SF) that he cooled with a combination
of
10K BTU window A/C unit, centrally located, and a dehumidifier...

That's a BAD idea, with the dehumidifier dumping heat indoors.

Nick

I don't know about that. It felt pretty comfortable in his house in
mid-August when they had several days in the 90s with high humidity. It
must not dump that much heat indoors . . . the 10K window a/c took care of
it nicely. -Dave

Sturdy window fan
 

wrote:
Hi,

I would like to purchase a window fan for one of two windows (24" x 24"
or 35" w x 21" h) but have been surprised by the poor quality of fans I
see in stores. Can anyone recommend a model with perhaps three speeds
and of build that will last more than a few years?

We will use the fan to help cool a small 1100 sq ft house off in the
summer after the sun has gone down (we are in southern California).

I agree that the general build quality of fans is far lower than it was
20 years ago. Very few high-quality window fans are produced any more.
Patton stopped making their excellent whole-house window fans long ago.
Lakewood discontinued their all-metal high-velocity window fan (model
HV18WR) a couple years back, but I recently heard that some Ace
Hardware locations might still have them in stock. You might want to
check into that.

Otherwise, the best window fan I know of that is still being produced
is the Air King 9166D. It's not cheap, though: $249.99 at Amazon.com.
See:

http://www.amazon.com/gp/product/B00073FHRQ/

I've seen them cheaper on eBay. Of course, with an item of this size,
shipping is an issue.

The Lasko 2155A window fan used to be good, but I don't know if they've
cheaped out on construction in more recent models. It's not metal, but
it is fairly heavily built (or was, the last time I saw one). Ace
Hardware has this. You might want to check it out.

All of the fans mentioned above can be mounted in a window so that it
will close behind the fan when not in use.

The only decent box fan being produced any more is the Lakewood P-25.
If you're interested in a box fan, see:

http://www.heatersnfans.com/item.asp?int_id=154

(Disclaimer: I haven't dealt with this company personally.)

You can also check eBay (or yard sales and thrift stores) for older
fans, many of which are still in serviceable condition.

-Josh

Sturdy window fan
 

wrote:
Otherwise, the best window fan I know of that is still being produced
is the Air King 9166D. It's not cheap, though: $249.99 at Amazon.com.

From www.froogle.com, these guys sell it for $180.
http://secure.data-comm.com/RB/Detail.bok?no=146912

The Air King 9600 (16 inch) sells for $88.
http://www.air-conditioner-home.com/product/9600.aspx

Just as a point of reference, I've done the bolting a
20" box fan in a window and it seems to work just fine.
I used a piece of cardboard with a circle cut out to fill
in the rest of the open window. The only drawbacks are
that it doesn't reverse and there is no thermostat.

Anthony

Sturdy window fan
 

Sturdy window fan
 

wrote:

... the best window fan I know of that is still being produced is
the Air King 9166D. It's not cheap, though: $249.99 at Amazon.com.

.... $183 as Grainger item 3C614. Is there a cheaper Lasko (800 394 3267)
version? It moves 3560 cfm with 170 W (21 cfm/W) vs 2470/90 = 27 for the
$50 Lasko 2155A.

Nick

Sturdy window fan
 

Anthony Matonak wrote:

wrote:

... the best window fan I know of that is still being produced
is the Air King 9166D.

It has ball vs sleeve (2155A) bearings, and replaceable parts :-)

The Air King 9600 (16 inch) sells for $88.

That's Lasko's "industrial" version of the $50 2155 A. Air-King/Lasko
differences are often small, eg a 3-prong plug.

Nick

Sturdy window fan
 

Sturdy window fan
 

"Anthony Matonak" wrote in message

I wouldn't even know how to go about measuring how much air a
box fan moves when mounted in a window. When I tried it, it
seemed that covering all but the area of the fan blades seemed
to work better.

Anthony

Years ago, window fan were made like that. Them mounted in the window and
had baffles on either side so it sucked air through the house. To make them
cheaper and more portable, the box fan was invented. Often, they suck air
in from the window and blow it right back out and not from through the
house. The cfm is an important measure, but lower cfm drawing across the
room is better than higher cfm just sucking in air and blowing it right back
out.

Sturdy window fan
 

Sturdy window fan
 

Thank you everyone for your suggestions. Summer will be a better
experience this year round, Steve.