DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Good picture- no -color -- b/w only (https://www.diybanter.com/electronics-repair/95537-good-picture-no-color-b-w-only.html)

Scott March 17th 05 09:17 PM

Good picture- no -color -- b/w only
 
A friend gave me his Mitsubishi 35 inch color TV CS3504R.

I get great picture on all channels, all inputs- cable, antenna, VCR but
only black and white.

I get no color.

I have changed the tint and color controls from the menu- no change.

Also, the menu IS in COLOR!?!! so I know the color part works just great.

I am scratching my head. I don't know enough about TVs to figure out why
I cannot get over the air color but can get internal color.

?

b March 17th 05 10:31 PM


Scott wrote:
A friend gave me his Mitsubishi 35 inch color TV CS3504R.

I get great picture on all channels, all inputs- cable, antenna, VCR

but
only black and white.

I get no color.

I have changed the tint and color controls from the menu- no change.

Also, the menu IS in COLOR!?!! so I know the color part works just

great.

I am scratching my head. I don't know enough about TVs to figure out

why
I cannot get over the air color but can get internal color.

?


loose connections on the xtal in the chroma decoder
-Ben


Barry Hobbs March 18th 05 08:40 AM

may sound obvious, but if youre using a scart lead, make sure that is in
properly at noth ends.


"Scott" wrote in message
om...
A friend gave me his Mitsubishi 35 inch color TV CS3504R.

I get great picture on all channels, all inputs- cable, antenna, VCR but
only black and white.

I get no color.

I have changed the tint and color controls from the menu- no change.

Also, the menu IS in COLOR!?!! so I know the color part works just great.

I am scratching my head. I don't know enough about TVs to figure out why I
cannot get over the air color but can get internal color.

?




Barry Hobbs March 18th 05 08:41 AM

sory ignore me, should have read the question properly ('all inputs')
"Scott" wrote in message
om...
A friend gave me his Mitsubishi 35 inch color TV CS3504R.

I get great picture on all channels, all inputs- cable, antenna, VCR but
only black and white.

I get no color.

I have changed the tint and color controls from the menu- no change.

Also, the menu IS in COLOR!?!! so I know the color part works just great.

I am scratching my head. I don't know enough about TVs to figure out why I
cannot get over the air color but can get internal color.

?




Shoreline Electronics March 20th 05 06:55 PM

Do you have good color on the monitor output?

Check these tips also :

---------------------------------------------------------------
Text pasted from WinSTIPS 2.0
http://www.ServiceSoftware.com
---------------------------------------------------------------

MITSUBISHI CS3504R

Color No Chroma

From Mitsubishi

Check The Value Of C7224(.047uf 50v Np).Located On The Digital-Pcb At Pin 4
Of Ic7104.

---------------------------------------------------------------

MITSUBISHI CS3504R

Color No Chroma

From Mitsubishi

May Be Intermittent. Suspect Vr7100 (50k). Located On Pcb-Digital At Ic7104
Pin 4.

---------------------------------------------------------------

MITSUBISHI CS3504R

Color No Chroma Main Or Pip

From Mitsubishi

Color And Luminance Ok From Monitor Output. Confirm Chroma Into Ic7104 Pin5.
If Ok Confirm Chroma Out Of Ic7104 Pin 3. If Missing Check C7198 ( Pin 6
Ic7104) For Leaky/Shorted. Located On Pcb-

---------------------------------------------------------------

MITSUBISHI CS3504R

Color No Chroma Main Or Pip

From Mitsubishi

Suspect Following Components On Pcb-Digital: C7103 1000uf 16v At
Ic7100 Pin 19

---------------------------------------------------------------

MITSUBISHI CS3504R

Color No Chroma Main Or Pip

From Mitsubishi

Suspect Defective C7119 (0.1uf/ 25v). Located On Pcb-Digital At Ic7101 Pin
9. * Note - Voltage At Pin 9 May Check Correctly, But Capacitor Is
Defective. Replace.

---------------------------------------------------------------

MITSUBISHI CS3504R

Color No Chroma Main Or Pip

From Mitsubishi

Suspect Defective 3.58mhz Crystal X601. Not Free Running Osc. If Chroma
Signal Low, X601 Will Drift Off Freq. Replace. Located On Pcb-Main At
Ic201 Pin 25. Pt# 285p015010

---------------------------------------------------------------

MITSUBISHI CS3504R

Digital No Color On Pip

From Mitsubishi

Color And Luminance Ok From Monitor Output. Confirm Chroma Into Ic7104 Pin
5. If Ok Confirm Chroma Out Of Ic7104 Pin 3. If Missing Check C7198 ( Pin
6 Ic7104) For Leaky/Shorted. Located On Pcb-

---------------------------------------------------------------



--
==========================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
860-399-1861
860-664-3535 (fax)

========================

"Scott" wrote in message
om...
A friend gave me his Mitsubishi 35 inch color TV CS3504R.

I get great picture on all channels, all inputs- cable, antenna, VCR but
only black and white.

I get no color.

I have changed the tint and color controls from the menu- no change.

Also, the menu IS in COLOR!?!! so I know the color part works just great.

I am scratching my head. I don't know enough about TVs to figure out why I
cannot get over the air color but can get internal color.

?





All times are GMT +1. The time now is 01:07 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter