Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
White Westinghouse!
20" M # WTV-61904, turn it on, hear audio,
but shuts right down! Has high voltage! All checks out fine, unhook yoke & works fine! Load yoke back on, & set works fine, now works ok with yoke! Ideas? Rono. |
#2
|
|||
|
|||
Rono wrote: 20" M # WTV-61904, turn it on, hear audio, but shuts right down! Has high voltage! All checks out fine, unhook yoke & works fine! Load yoke back on, & set works fine, now works ok with yoke! Ideas? Rono. Why would you power the set with the yoke disconnected? Trying to burn a dot in the center of the CRT? If the set works OK after disconecting then reconnecting a large plug like the yoke, the problem is likely loose or cracked solder joints or maybe a hairline crack in the circuit board. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Origin of Hex Head Nuts/bolts? | Metalworking | |||
20" White Westinghouse...no power | Electronics Repair | |||
White Gas, Coleman Fuel, and Unleaded Gasoline | Metalworking | |||
please explain this wiring - black, red, white, ground | Home Repair |