|
Sharp 27NS50 Color Problem
Sharp 27NS50 27" TV 4 years old
The cable connector had been previously come loose inside and I glued it and it worked for a long time. Recently while moving it the glued connector came loose again. I opened it up and glued it back again. At this time it had a perfect picture. After putting it back together, now it has a strong yellow tint to the screen no matter if it is from cable, front rca or back rca jacks. It even has a yellow tint to the screen with nothing hooked up. Should I try working on the jack again or is there another problem? Any help appreciated. |
You may have bumped a cable or switch that is on the CRT board ( The small
4x4 inch board mounted to the neck of the picture tube. -- ========================== Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 860-399-1861 860-664-3535 (fax) ======================== "N8" wrote in message k.net... Sharp 27NS50 27" TV 4 years old The cable connector had been previously come loose inside and I glued it and it worked for a long time. Recently while moving it the glued connector came loose again. I opened it up and glued it back again. At this time it had a perfect picture. After putting it back together, now it has a strong yellow tint to the screen no matter if it is from cable, front rca or back rca jacks. It even has a yellow tint to the screen with nothing hooked up. Should I try working on the jack again or is there another problem? Any help appreciated. |
You should get the set properly serviced. There are many things that can
cause your problem. Gluing connectors is not the way to go. The proper approach is to replace defective parts, or have them properly serviced! -- Jerry G. ====== "N8" wrote in message k.net... Sharp 27NS50 27" TV 4 years old The cable connector had been previously come loose inside and I glued it and it worked for a long time. Recently while moving it the glued connector came loose again. I opened it up and glued it back again. At this time it had a perfect picture. After putting it back together, now it has a strong yellow tint to the screen no matter if it is from cable, front rca or back rca jacks. It even has a yellow tint to the screen with nothing hooked up. Should I try working on the jack again or is there another problem? Any help appreciated. |
The actual connection wasn't glued. I should've specified more clearly.The
mount was loose.. I've since ruled that out as the problem as it gives me the yellow screen from RCA jacks and even with nothing hooked up at all. I've checked and rechecked all the connections inside, but no go. Everything works fine it just has a intense yellow tint. "Jerry G." wrote in message ... You should get the set properly serviced. There are many things that can cause your problem. Gluing connectors is not the way to go. The proper approach is to replace defective parts, or have them properly serviced! -- Jerry G. ====== "N8" wrote in message k.net... Sharp 27NS50 27" TV 4 years old The cable connector had been previously come loose inside and I glued it and it worked for a long time. Recently while moving it the glued connector came loose again. I opened it up and glued it back again. At this time it had a perfect picture. After putting it back together, now it has a strong yellow tint to the screen no matter if it is from cable, front rca or back rca jacks. It even has a yellow tint to the screen with nothing hooked up. Should I try working on the jack again or is there another problem? Any help appreciated. |
I've taken everything out and checked all connections. No solder is loose.
Any other ideas? Thanks for your help!!!! "Shoreline Electronics" wrote in message m... You may have bumped one of the large transistors on the CRT drive board and lifted a solder pad. If your picture is Yellow......then you have good Red & Green drive......your missing your Blue drive. ========================== Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 860-399-1861 860-664-3535 (fax) ======================== "N8" wrote in message ink.net... The actual connection wasn't glued. I should've specified more clearly.The mount was loose.. I've since ruled that out as the problem as it gives me the yellow screen from RCA jacks and even with nothing hooked up at all. I've checked and rechecked all the connections inside, but no go. Everything works fine it just has a intense yellow tint. "Jerry G." wrote in message ... You should get the set properly serviced. There are many things that can cause your problem. Gluing connectors is not the way to go. The proper approach is to replace defective parts, or have them properly serviced! -- Jerry G. ====== "N8" wrote in message k.net... Sharp 27NS50 27" TV 4 years old The cable connector had been previously come loose inside and I glued it and it worked for a long time. Recently while moving it the glued connector came loose again. I opened it up and glued it back again. At this time it had a perfect picture. After putting it back together, now it has a strong yellow tint to the screen no matter if it is from cable, front rca or back rca jacks. It even has a yellow tint to the screen with nothing hooked up. Should I try working on the jack again or is there another problem? Any help appreciated. |
| All times are GMT +1. The time now is 02:52 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter