 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Faulty tape loading mechanism
I recently purchased a used Panasonic PV-4551 (1995 model) and it seems
to have a problem accepting tapes. When I try to put a tape into the machine, it'll go in about half way, then eject itself. After numerous tries, I was able to get a tape inside and it played fine. However, I continue to have trouble loading them. It's frustrating, because this seems to be a good VCR...if I could only get a tape inside without trying over and over again! Can anyone diagnose this issue and recommend a solution? It would be much appreciated. Thanks in advance. mam |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Sony SVO-2000 tape loading problem | Electronics Repair | |||
| Help with U-Matic loading problem? | Electronics Repair | |||
| How to Adjust the Tape Path Alignment on Newer VCRs | Electronics Repair | |||
| How to fix tape eating VCR | Electronics Repair | |||
| Fisher cassette heads | Electronics Repair | |||
Threaded Mode
