Mitsubishi VS-5071 no picture has sound.
Mitsubishi VS-5071 projection TV (in a good shape) has no picture, but
receives sound fine. Nothing comes up. The tuner works but the menu (OSD) is not accessible. The tube filaments are lit up. Would the problem lie in the vertical circuits or the PiP module? Any ideas are greatly appreciated. Thanks. Mike. |
This model does not have the typical PIP problems like the VZ1B and VZ2
chassis. If you have no HV or sweep, then the vertical circuit is a good cause....blah blah blah.( I'm tired!) Check this tip : --------------------------------------------------------------- Text pasted from WinSTIPS 2.0 http://www.ServiceSoftware.com --------------------------------------------------------------- MITSUBISHI V13 Raster No Go. Has Sound And Hi Voltage (No Vertical) Bryn Mawr TV R510 Fuse Resistor (Off Pin 5 Of Flyback) Opens For No Reason (1.2 Ohm 1/2w /103p398010) Replaced Vertical Ic (La7838) Ic401 For P.M --------------------------------------------------------------- MITSUBISHI V13 Shutdown. Loud Pop Then No Raster Has Sound And Hi Voltage (No Vertical) Bryn Mawr Tv Hole In Ic401 (La7838) Open C406 (100uf /35v) Open R510 Fuse Resistor (Off Pin 5 Of Flyback) (1.2 Ohm 1/2w /103p398010) --------------------------------------------------------------- -- ========================== Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 860-399-1861 860-664-3535 (fax) ======================== wrote in message oups.com... Mitsubishi VS-5071 projection TV (in a good shape) has no picture, but receives sound fine. Nothing comes up. The tuner works but the menu (OSD) is not accessible. The tube filaments are lit up. Would the problem lie in the vertical circuits or the PiP module? Any ideas are greatly appreciated. Thanks. Mike. |
All times are GMT +1. The time now is 09:26 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter