Epson ELP-3300 projector has vertical roll
My Epson projector developed a vertical roll. Cannot locate any
vertical hold adjustment and my service manual does not provide any help. Projector is too old to be worth repair shop costs, but I just replaced lamp ($200) and would like to get a little more use from it. |
You will have to follow the video signal path through the sync separator
with a scope, and look for where the vertical sync signal is lost. Many times, it is a defective coupling or decoupler cap that can cause this. However, there are times, when these types of faults can get a bit complex. I would suggest to NOT mess with any adjustments. The proper answer is to troubleshoot the unit, and fix the fault. -- Jerry G. ====== "mydaj [ROR]" wrote in message ... My Epson projector developed a vertical roll. Cannot locate any vertical hold adjustment and my service manual does not provide any help. Projector is too old to be worth repair shop costs, but I just replaced lamp ($200) and would like to get a little more use from it. |
All times are GMT +1. The time now is 02:16 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter