Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Rohde&Schwarz Signal Generator SMPD 3768011
Hello everyone,
I have a technical problem with signal generator model "SMPD 3768011" (5Khz - 2700MHz) After to have switched "ON" the instrument it appears for approximately one second on the display the written "IEC 13", and subsequently instead of the frequency generated and other operating information, appears this code: "--- 6" that I think was an code of internal error. If I press a button whichever of the frontal control panel, this code disappear and the generator run properly in all it's function, but after a few second the "--- 6" code reappear even if the generator work properly, and so on. The signal generator work well, but this is a boring problem that force me to press anything button, every 10/30 second!! What mean this code, and/or what I can make in order to resolve this problem? (I don't have a user/service manual in which there are a service info for troubleshooting this kind of problem...) Many many thanks for the information that you will be able give. Fabio |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Very Distant TV stations and Antennas | Home Repair | |||
Video signal from CCTV cameras?? | UK diy |