Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Help fixing Weller EC2002A Soldering Station
Help, my beloved 20 year old Weller EC2002A Soldering Station has
cr@pped out! Although it seems to heat up normally and can even be adjusted, the display only flashes "Err" briefly when turned on. I checked the thermistor in the iron and it seems to be OK. I even bought a used newer but junky looking EC2002-0 controller, but it seems to have other problems and has different parts inside so a swap is not in order. How does one fix these? TIA -- Joe Leikhim K4SAT "The RFI-EMI-GUY" The Lost Deep Thoughts By: Jack Handey Before a mad scientist goes mad, there's probably a time when he's only partially mad. And this is the time when he's going to throw his best parties. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
repair Weller EC2001 soldering station | Electronics Repair | |||
Recommendations for soldering station and Desoldering station or rework station. | Electronics Repair | |||
Repair Weller Solder Station | Electronics Repair |